Uniden GMR2238-2CK

Uniden GMR2238-2CK priručnik

  • GMR2238-2CK
    *Range may vary depending on environmental and/or topographical conditions.
    15 GMRS / 7 FRS Channels
    99 Sub Codes
    (CTCSS Tone and DCS Code)
    Up to 22 Mile Range*
    Internal VOX Circuitry
    5 Selectable Call Tone Alerts
    Backlit LCD Display
    Optional Headset Accessories
    • Headset Jack
    1 Antenna
    2 PTT (Push-To-Talk) Button
    3 Monitor Button
    4 Scan Key
    5 Menu Key
    6 Channel Tone Key
    7 Speaker
    8 Up/Down Button
    9 Headset Jack
    10 On/Off Key
    11 Call Key
    12 Microphone
    13 DC IN 9V
    14 Battery Level Meter
    15 Receive Indicator
    16 Call Indicator
    17 Scan Indicator
    18 Channel Indicator
    19 Hi Power Indicator
    20 Low Power Indicator
    21 Transmit Indicator
    22 Volume Setting Indicator
    23 Keypad Lock Indicator
    24 VOX Indicator
    25 Sub Code Indicator
    26 Charging Contacts
    Congratulations on your purchase of the Uniden
    GMR2238-2CK (General Mobile Radio Service)
    radio. This lightweight, palm-sized, radio is a state-
    of-the-art device, equipped with many valuable
    features. Use it at sporting events, to stay in
    contact with family and friends, hiking, skiing,
    outdoors, or in a neighborhood watch for vital
    Your package contains two radios, two rechargeable
    NiMH battery packs (#BP40), one AC adapter (#AD-
    0001), one charging cradle (#RC1238), two belt clips
    and this reference guide. You can operate the unit
    using the rechargeable NiMH battery pack or 4 AAA
    alkaline batteries (not included). To order the following
    optional accessories, visit our web site at www.
    uniden.com or call 1-800-554-3988 during regular
    business hours. Use only Uniden accessories.
    • NiMH Battery Pack - #BP40
    • Charging Cradle - #RC1238
    • Headset - #HS910/HS915/ZA-133
    • AC Adapter - #AD-0001
    • DC Adapter - #DC-1002
    The radio operates on the General Mobile Radio
    Service (GMRS) frequencies when using
    Channels 1-7 and channels 15-22. You must
    have a GMRS license issued by the Federal
    Communications Commission to legally use
    these channels. For licensing information and
    application forms, visit the FCC online at: www.
    fcc.gov/wtb/uls or call the FCC hotline at
    1-800-418-3676. If you have any questions, you
    can contact the FCC direct at 1-888-225-5322.
    No license is required for operation on channels
    8-14 or operation on any channel in Canada.
    Your radio uses a supplied NiMH battery pack or
    4 AAA alkaline batteries (not included).
    To install the NiMH battery pack:
    1) Make sure your radio is OFF.
    2) Remove the battery compartment door by
    pressing the tab at the bottom of the
    compartment door, and remove the cover.
    3) Install the NiMH battery pack into the battery
    compartment. Be certain to follow the
    instructions written on the label on the battery
    pack. Installing the battery pack incorrectly will
    • Roger Beep
    • Battery Charger
    Battery Level Meter
    • Channel Monitor
    • Channel Scan
    • Keypad Lock
    DC IN 9V Jack
    This unit has a battery level meter on the display to
    indicate the status of the batteries. When the
    battery in the unit is low, the battery level meter
    flashes. Recharge the NiMH battery
    pack immediately or if you are using the alkaline
    batteries, you must replace the alkaline batteries in
    order to continue using the radio.
    Warning! To avoid the risk of personal injury or
    property damage from fire or electrical shock, only
    use the Uniden accessories specifically designated
    for this product.
    GMR2238-2CK RADIO
    If you use the rechargeable NiMH battery pack, two
    radios can be charged directly or by using the
    supplied charging cradle.
    Charge by Using the Radio
    1) Connect the optional DC adapter (#DC-1002) to
    DC IN 9V jack of the radio and to a cigarette
    lighter port.
    2) Charge the battery pack for 16 hours until the
    battery indicator stops flashing.
    Using the Charging Cradle
    1) Connect the AC adapter (#AD-0001) to DC IN 9V
    jack and to a standard 120V AC wall outlet.
    2) Set the charging cradle on the desk or tabletop,
    and place the radio in the charging cradle with
    the keypad facing forward.
    3) Make sure that the LED illuminates. Charge the
    battery pack for 16 hours and remove the radio
    from the charging cradle after charging.
    For charging batteries directly without the cradle,
    use only the #DC-1002 Cigarette Lighter Adapter
    cord, available from www.Uniden.com.
    Other power cords could damage your radio.
    DC IN 9V Jack of the radio is for charge only.
    Be sure to install the battery before charge.
    Use only the supplied battery and AC adapter or
    approved accessories from Uniden.
    Charge time may vary depending on the battery
    life remaining.
    Do not recharge alkaline batteries. Doing so can
    create a safety hazard or damage the radio.
    For fastest charging, turn off the radio before
    prevent the unit from operating.
    4) Replace the battery compartment door.
    In order to get the most out of your new radio, read
    this reference guide completely before attempting to
    operate the unit.
    Turning the Radio On and Adjusting the Volume
    1) Press and hold the
    key to turn the radio ON,
    and increase the speaker volume by pressing the
    key. To decrease the volume, press the
    2) Press and hold the key again to turn the radio
    Adjusting the Sound (Key Beeps)
    Your radio emits a beep each time one of the keys
    (except for the PTT button and CALL key) is
    To turn this sound OFF, press and hold the
    CALL key while turning ON the radio. Repeat this
    step to turn the sound ON.
    Choosing a Channel
    Your radio has 22 channels and 99 Sub codes you
    can use to talk to others. In order to speak to
    someone, each of you must be set to the same
    channel and Sub code.
    To choose a channel:
    With the radio in "Normal" operating mode press the
    CHAN TONE key and press the or key to
    increase or decrease the channel number displayed.
    Note: Channels 1-7 have an typical range of up to
    22 miles. Channels 8-14 have an typical range of
    up to 5 miles. Channels 15-22 have an typical
    range of up to 22 miles. You can know which GMRS
    or FRS channel is active by the icon. hi icon is
    displayed while scanning GMRS channels, and the
    lo icon is displayed while scanning FRS channels.
    Choosing a Sub Code
    Each of the channels 1-22 may have any one of
    the codes, OFF or 1-99 selected. Code oF (OFF)
    indicates no Sub code selected and your radio can
    receive a signal regardless of the code settings of
    the transmitting radio.
    1) Press CHAN TONE in channel select mode.
    The subcode indicator will flash.
    2) Press the or key to increase or decrease
    the code number displayed. You can also select
    oF (OFF) at this stage.
    3) Exit the Menu.
    Channel Scan Feature
    Your radio has a channel scan feature that allows
    you to easily scan all 22 channels. When an active
    channel is detected, the radio pauses on that
    channel until the channel is clear. Then after a 2
    second delay, the radio continues scanning.
    Pressing the PTT button while the scan is paused
    on a channel allows you to transmit on that
    To turn ON channel scan:
    Press the SCAN key until the scan... icon is
    displayed. The channel number on the display
    changes as the radio rapidly cycles through the
    To turn OFF channel scan:
    Press the CALL, PTT, MENU or SCAN key.
    Talking on Your Radio
    To talk to others using the radio:
    1) Press and hold the PTT button and speak in a
    clear, normal voice about 2-3 inches away from
    the microphone. While you are transmitting, the
    icon appears on the display. To avoid cutting
    off the first part of your transmission, pause
    slightly after pressing the PTT button before you
    start talking.
    2) When you have finished speaking, release the
    PTT button. You can now receive incoming
    calls. While receiving, the icon appears on
    the display.
    Monitor Mode Feature
    Your radio allows you to listen for weak signals on
    the current channel at the press of a key.
    To turn ON the Monitor Mode:
    For brief listening, press MON button. The
    icon blinks.
    Press and hold MON button for 2 seconds until
    two beeps sound for continuous listening. The
    receiver circuit stays open, letting both the noise
    and weak signals to be heard.
    To turn OFF Monitor Mode:
    Press MON button to return to "Normal" mode,
    and the
    icon stops blinking and disappears.
    Navigating through the Menu
    Use the MENU button to access your radio's
    advanced functions.
    1) To enter the Menu, press the MENU key.
    Normal NormalVOX Level Call Tone Key Lock
    OFF, 1-5
    2) Additional presses of the MENU key advances
    you through the Menu until exiting to "Normal"
    operating mode.
    3) Other methods of exiting the Menu function are:
    a. Press and hold the key again.
    b. Press the PTT, MON, CALL, SCAN or CHAN
    TONE key
    c. Wait 10 seconds until the unit automatically
    returns to “Normal” mode.
    Voice Operated Transmission
    Your radio is equipped with a user selectable Voice
    Operated Transmitter (VOX) that can be used for
    automatic voice transmissions. The VOX feature is
    designed to be used with a headset with a
    microphone. Transmission is initiated by speaking
    into the remote microphone instead of pushing the
    PTT button.
    To select the VOX level:
    1) Enter the Menu. Advance through the Menu until
    the vox icon appears on the display. The current
    level (OFF, 1-5) will be indicated. Level oF (OFF)
    disables VOX, while levels 1-5 set the sensitivity
    of the VOX circuit.
    2) Press either the or key to the desired VOX
    sensitivity level. Use level 1 for increased
    sensitivity to voice in normally quiet environments
    and use a higher level to reduce undesired
    activation in very noisy environments.
    Transmitting a Call Tone
    Your radio is equipped with 5 selectable call tones
    that are transmitted when the CALL key is pressed.
    To select a call tone:
    1) Enter the Menu. Advance through the Menu until
    the call icon is shown on the display. The
    current call tone number (1-5) is indicated.
    2) Press the or key to increase or decrease
    the number to the desired call tone. Each tone
    will be heard through the speaker.
    To transmit the selected call tone, press the CALL
    key. The selected tone will automatically be
    transmitted for a fixed length of time. Call Tone will
    be cancelled when the PTT button is pressed.
    Key Lock
    To lock the keypad:
    1) Enter the Menu. Advance through the Menu until
    the icon appears on the display. The current
    Key Lock status oF (OFF) blinks on the display.
    2) To switch the Key Lock mode from oF (OFF) to
    on, press the key.
    3) To confirm the setting, press the MENU key.
    The radio returns to the "Normal" mode.
    Note: If you exit the setting mode before confirming
    your selection by pressing the MENU key, the Key
    Lock setting will be set to oF (OFF).
    To unlock the keypad:
    1) Press and hold the
    key to turn the radio OFF.
    2) Press and hold the key again to turn the radio
    ON. The keypad is unlocked.
    Automatic Power Save Feature
    Your radio has a unique circuit designed to
    dramatically extend the life of the batteries. If there is
    no transmission nor an incoming call within 3 seconds,
    your radio switches to the Power Save mode. The
    radio is still able to receive transmissions in this
    LCD Backlight
    The LCD Backlight automatically turns ON when any
    key (except the PTT button) is pressed. The LCD
    display illuminates for 10 seconds before turning
    Roger Beep
    Roger Beep is a BEEP that is sent to notify the end of
    transmission (both PTT and VOX transmission).
    Roger Beep can be heard through the speaker when
    both Roger beep and Key Beep are set to ON. When
    Roger beep is set to ON and Key Beep OFF, Roger
    Beep will not be heard from the speaker but it will be
    transmitted to your party. When Roger Beep is set to
    OFF, Roger Beep neither be herad nor transmitted.
    To turn ON Roger Beep:
    Press and hold the key while turning ON the radio.
    To turn OFF Roger Beep:
    Press and hold the key while turning ON the radio.
    Battery must be installed for operation, even from
    external power.
    If battery Power is low, you cannot operate the
    radio even using external power. Allow the
    batteries to charge before using. If you try to
    transmit while power is low, the radio will
    automatically turn off.
    UT050ZK_GMR2238-2CK UAC_0528.indd 1UT050ZK_GMR2238-2CK UAC_0528.indd 1 5/28/2010 11:14:02 AM5/28/2010 11:14:02 AM
Uniden GMR2238-2CK

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom GMR2238-2CK trgovačke marke Uniden ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda GMR2238-2CK trgovačke marke Uniden pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod GMR2238-2CK trgovačke marke Uniden. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 8.6. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski. Imate li pitanja u vezi s proizvodom GMR2238-2CK trgovačke marke Uniden ili vam treba pomoć? Ovdje postavite svoje pitanje

Značajke proizvoda GMR2238-2CK trgovačke marke Uniden

Brend Uniden
Model GMR2238-2CK
Proizvod Voki-toki
EAN 0050633101506
Jezik Engleski
Vrsta datoteke PDF
Broj kanala 22
Maksimalan domet 35000m
Broj podržanih baterija 2
Tehnologija baterije Nikal-metal-hidrid (NiMH)
Težina i dimenzije
Dimenzije (ŠxDxV) 228.6 x 101.6 x 279.4mm
Težina 907g
Sadržaj ambalaže
Kopča za remen
Baterije uključene
Upravljanje pozivima
Broj melodija 5

Povezani priručnici za proizvode

Voki-toki Uniden