Tokina 11-16mm f/2.8 DX II Nikon

Tokina 11-16mm f/2.8 DX II Nikon priručnik

(1)
  • Attach/detach the lens to/from your camera according to the instructions in the
    manual provided with your camera.
    * When attaching/detaching the lens, be careful not to touch the electronic
    contacts on the lens mounting surface nor crush these contacts by strong
    impact.
    * Depending on the lens model, you may hear a sound from inside the lens
    when the lens is shaken lightly. This is the sound of the ball bearings that
    are designed to smooth the action of the focus ring. It does not indicate a
    problem with the general functioning of the lens.
    Precautions for Use
    Attaching a lens hood
    Unlike a SLR camera using a silver halide film, a digital SLR camera
    produces a large measure of reflection due to its imaging sensor. It is
    therefore recommended that a lens hood be attached when you're
    taking photographs with a digital SLR camera. Especially when a
    wide-angle lens is used, a lens hood should be attached even indoors.
    The DX lens is designed exclusively for a digital SLR camera of
    APS-C size.
    Tokinas DX lenses are deigned exclusively for use with digital SLR camer-
    as having an APS-C sized image sensor. Using the DX lenses with a digital
    SLR camera with an imaging sensor of a size larger than APS-C, or with a
    SLR camera designed for silver-halide film, will cause vignetting.
    Using Ultra-Wide Angle Lenses.
    If you are using a super/Ultra-wide angle lens in auto focus, it may not
    focus on the periphery (outer edges) of the frame in AF mode.
    Since the depth of field is an ultra-wide angle zoom lens is very deep,
    focus detection in the periphery of the frame becomes difficult for
    cameras set in multi-point auto focus.
    We recommend using a central focus detection setting on your camera
    when using auto focus with ultra-wide angle lenses.
    The Mark (certication mark for conformance with the European export inspection requirements) is shown on lenses containing electronic parts.
    The specication data is based on the use of the lens with a Canon camera.
    Tokina's DX lenses are designed for use with digital
    single-lens reflex (SLR) cameras having APS-C sized
    sensors. Do not use Tokina DX lenses with digital SLR
    cameras having and image sensor larger than APS-C
    size, or with a SLR camera that uses film.
    Tokina's FX lenses are designed for digital SLR cameras
    with full sized (24x36mm) image sensors.
    This lens is intended for use with VDSLR's. Auto focus
    can be used when taking still photos but emphasis of
    this lens is video use.
    Instruction
    Manual
    Hood Attachment Index
    Follow-focus gear
    Focus Distance Index
    Zoom Ring
    Center Index
    Hood Right Position Indicator
    Manual Focus Ring
    Auto-Focus (AF) Position
    Manual Focus (MF) Position
    󱀓 Focus Distance Scale
    󱀔 Focal Length Scale
    Model
    Item
    Optical structure
    elements/groups
    Angle
    of view
    Minimum focus
    distance (m)
    Minimum
    aperture
    Number of
    aperture
    diaphragms
    Lens
    hood
    Weight
    (g)
    Maximum
    diameter
    (mm)
    Overall
    length
    (mm)
    Filter
    size
    (mm)
    104821311 220.3 1 : 11.6 89.2 84.0 550
    BH77B
    779
    Maximum
    macro
    magnication
    ENGLISH
    AT-X 116 PRO DX V
    99541412 220.25 1 : 4.94 90.2 84.0 532
    BH77B
    779
    AT-X 12-28 PRO DX V
    103641312 220.28 1 : 4.82 94.5 89.0 600
    BH821
    829
    AT
    -
    X 17-35mm F4 PRO FX V
    http://www.tokinalens.com
    Descriptions of Parts
    How to Attach/Detach the Lens
    The lens normally focuses automatically when the focus mode switch on the
    lens is set to the Auto focus (AF) position. If the camera is in the manual-focus
    (MF) position, adjust the focus by looking into the finder and turning the manual
    focus ring. This lens also supports focusing through the use of a focusing aid.
    Focusing
    If the camera’s built-in flash is used, the light of the built-in flash will be partially
    obstructed by the lens, so the picture shows a large shaded area at the bottom
    of the image. Therefore, it is advisable to use an external flash when this lens is
    attached.
    Caution Regarding the Use of a Built-in Flash
    This lens is equipped with an interlocking follow focus gear on the manual focus
    ring for use in a cinematic follow focus rig.
    To use a follow focus, please place the manual focusing ring in the MF position,
    focus and shoot.
    Before shooting, please confirm that the follow focus gear is meshed properly
    with the follow focus gear on the lens.
    About Follow Focus
    When photographing people with the aid of a flash, their eyes sometimes show
    as red in the image. This is called the “red-eye phenomenon. Follow your
    camera manual instructions on how to remove red eye.
    Flash Photography (Red-eye Phenomenon)
    Performance Table
    Use the appropriate sized threaded filters with these lenses. Be sure your filters
    are clean before taking a photo. Perfect photographs cannot be taken if the
    filter is dirty or when water droplets or other foreign particulates are on the filter.
    Clean the filter thoroughly before taking photographs.
    * Always use one filter at a time. If two or more filters are used together, or when
    a thick filter such as a polarized filter is used, vignetting (darkening at the
    corners of the exposed image) may occur.
    Filters
    For the exposure mode settings, follow the instructions in the manual provided
    with your camera.
    Exposure Modes
    Lens Hood
    <How to switch from the Auto focus position to manual focus position>
    The lens focus mode can be switched between the
    auto focus (AF) mark on the lens barrel and manual
    focus (MF) positions at any time by moving the
    manual focus ring forward or backward. When the
    focus ring is moved back toward the mount the AF
    mark will be covered and the lens will only focus
    manually. Move the focus ring toward the front of the lens for auto-focus.
    * For lenses using either the Nikon or Canon mounting system, it is possible to
    use manual focus without switching the focus mode switch on either the
    camera body or the lens to the manual position.
    In the Auto focus position the manual focus ring turns freely.
    * For all Canon mounts and Nikon mount, the built-in AF motor will be automat-
    ically turned off when the focus ring is switched to MF mode position.
    One-Touch Focus Clutch Mechanism
    A lens hood is designed to help reduce or prevent flare and ghost images that are
    caused by strong diagonal or side rays of light striking the front of the lens. We
    recommend that you use a lens hood at all times to ensure clear, problem-free
    photographs and video. The lens hood also provides protection for the lens itself.
    * A lens hood can be attached in the reverse direction on the front of the lens
    for storage.
    Hood right position indicator
    Hood attachment index
    To securely install the hood, align the mark
    on the hood with the hood attachment
    index (
    ) on the lens, and then turn the
    hood clockwise, as viewed from the front,
    until a click is heard. Then, confirm the
    position of the mark on the hood aligns
    with the position of the hood position
    Indicator on the lens.
    To securely install the hood, align the
    mark on the hood with the hood attach-
    ment indicator () on the lens, and then
    turn the hood clockwise, as viewed from
    the front, until a click is heard.
    Confirm that the mark on the hood is
    aligned with the center index on the lens.
    * When attaching the hood, turn it until you hear a click to ensure a secure fit.
    If the hood is not attached properly, vignetting could occur.
    <How to attach the lens hood>
    <Installation Example>
    KT Nakano Building
    5-68-10, Nakano, Nakano-ku, Tokyo 164-8616, Japan
    AT
    -
    X 116 PRO DX V11~16mm F2.8
    17~35mm F4
    AT
    -
    X 12-28 PRO DX V12~28mm F4
    series
    VDSLR
    *When the Canon mount is switched to the MF position, the motor switch in
    the lens automatically turns off. (The motor switch in the lens automatically
    turns off when Nikon mounts are switched to the MF position as well. )
    AT-X 116 PRO DX V
    AT-X 17-35mm F4 PRO FX V
    Hood Attachment Index
    mark
    TO FIT CANON Digital
    AT-X 116 PRO DX V
    AT-X 12-28 PRO DX V
    TO FIT CANON Digital
    AT-X 17-35mm F4 PRO FX V
    TO FIT CANON Digital
    󱀓
    󱀔
    󱀓
    󱀔
    󱀓
    󱀔
    AT-X 116 PRO DX V】【AT-X 12-28 PRO DX V
    AT-X 17-35mm F4 PRO FX V
Tokina 11-16mm f/2.8 DX II Nikon

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom 11-16mm f/2.8 DX II Nikon trgovačke marke Tokina ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda 11-16mm f/2.8 DX II Nikon trgovačke marke Tokina pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod 11-16mm f/2.8 DX II Nikon trgovačke marke Tokina. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 7.2. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski. Imate li pitanja u vezi s proizvodom 11-16mm f/2.8 DX II Nikon trgovačke marke Tokina ili vam treba pomoć?