Tenda Nova MW5s priručnik

Ovdje besplatno pročitajte Tenda Nova MW5s priručnik. Pročitali ste priručnik, ali odgovara li on na Vaše pitanje? Postavite onda svoje pitanje na ovoj stranici drugim vlasnicima Tenda Nova MW5s.

Solid green Good connection
Solid yellow Fair connection
Solid red Disconnected
RST button
RST button
DC power jack to connect to
12 V 1 A power adapter
DC power jack to connect to
9 V 1 A power adapter
WAN/LAN port
WAN/LAN port
LAN port
LAN port
RST
PWRLAN
WAN/LAN
LED indicator
RST
PWRLAN
WAN/LAN
Theprimarynode-Mesh5
Thesecondarynode-Mesh3f
Ethernet jack
Or
DSL
WAN
Modem
Connecting the Primary Node
1. Power off your modem, and remove its battery (if any).
2. Use the included Ethernet cable to connect a LAN port of
your modem or the Ethernet jack to the WAN/LAN port of
the primary node (A label is on its top panel).
3. Re-plug your modem and power it on.
4. Use the 12 V 1 A power adapter to connect the primary node
to a power source, and its LED indicator lights solid green.
Wait for about 40 seconds. The system completes startup
when the LED indicator blinks green.
Connecting the Mobile Device
to the Primary Node
Go to the WiFi network list on your mobile device, select the
SSID of the primary node, and enter its password. The SSID
and password are specified on the bottom label of the
primary node.
1. For the best performance, place each node:
in an elevated, open position with coverage area of your
existing nova WiFi network. This is approximately 20 – 30
feet or 6 – 9 meters between each node.
Keep your nodes away from electrical equipment with
strong interference, such as microwave ovens, induction
cookers and refrigerators.
2. Use the 9 V 1 A power adapters to connect the secondary nodes
to separate power sources, their LED indicators light solid green.
Wait for about 40 seconds. The secondary node is connecting
to another node when its LED indicator blinks green.
Installing the Tenda WiFi App
Download the Tenda WiFi App onto your mobile device by
searching for Tenda WiFi in the App Store/Google Play, or by
scanning the QR code. Then, install the App.
The MW5s consists of one Mesh5 and one or two Mesh3f. The
Mesh5 is the primary node and is used to connect to a modem or
an Ethernet jack, and the Mesh3f is the secondary node used to
extend the WiFi network of the primary node.
Use the 12V 1A power adapter to connect to the primary node while
the 9V 1A power adapters to the secondary nodes for better
stability.
TendaWiFi
Available for iOS and Android
Or
3. When all the nodes are connected, the LED indicators on the
secondary nodes show as follows:
4. If a node's LED indicator does not light solid green, relocate it
according to step 1 in to get a better connection.V 
To access the internet:
- Wired devices: Connect wired devices to the LAN ports of
your nodes.
- Wireless devices: Connect wireless devices to your WiFi
network using the SSID and password you set.
If you want to manage the network anytime, anywhere then
access the App, tap and login to your account.
NOVA_XXXX
XXXXXX
Wi-Fi
12:23PM
CHOOSE A NETWORK...
91%
Settings
Wi-Fi
V
Connecting the Secondary
Nodes to the Internet
Q5: My 2.4 GHz WiFi-enabled devices, such as a home security
camera, cannot connect to my nova WiFi network. What
should I do?
Getting to Know Your Device
Quick Installation Guide
AC1200 Whole Home Mesh WiFi System
MW5s (3-pack)
Internet
Connecting the Primary Node
to the Internet
Run the Tenda WiFi App and follow the on-screen instructions
to connect the primary node to the internet.
After it is connected to the internet, its LED indicator should
turn a solid green.
FAQ
A1: Run the Tenda WiFi App, tap Settings in the lower-right corner,
tap Wireless Settings, change your SSID and password, and tap
Save. After changing your SSID and password, you need to
reconnect your mobile devices using the new SSID and password.
A2: Tap the node on the Tenda WiFi App, tap“...”in the upper-right
corner, and choose Delete.
Note: This removing operation restores the node to factory
settings.
A4: With your nodes powered on, hold the Reset (RST) button of your
primary node down using a reset-pin or a paper clip for about 6
seconds. Release it when the LED indicator blinks fast. Your
network is reset successfully when the LED indicator lights solid
on and then blinks again. And all nodes are then restored to
factory settings.
A3: Yes. Run the Tenda WiFi App, tap Settings in the lower-right
corner, tap Add nova, and follow the on-screen instructions to
add.
Q1: How can I change my SSID and password?
Q2: How can I remove a node from my WiFi network?
Q4: How to restore my network to factory settings?
Q3: Can I add another new set of node to expand my network
coverage?
A5: ( 1 ) Connect your smart phone used for setup to your nova WiFi
network.
(2) Run the Tenda WiFi App, tap Settings, Smart Assistant, and
Enable. Your smart phone connects to the 2.4 GHz WiFi network.
(3) Use the smart phone to set up your 2.4 GHz WiFi-enabled device
guided by the App of the device you would like to connect.
LED indicator description
After a node is powered on, the LED indicator lights solid green for
about 40 seconds to complete startup. Then, the LED indicator lights
one of the following colors:
Node Type
Status
Description
The primary node
Mesh5
Blinking green
Connecting to the internet
Solid green
Connected to the internet
Solid red
Disconnected
The secondary
node
Mesh3f
Blinking green
Connecting to the primary node
Solid green
Good connection.
Solid yellow
Fair connection.
Solid red
Disconnected.
Copyright
© 2018 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology
Co., Ltd. Other brand and product names mentioned herein are trademarks
or registered trademarks of their respective holders. Specifications are
subject to change without notice.
Technical Support
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052
Operating Environment
Temperature: 0°C-40°C Humidity: (10 - 90)% RH, non-condensing
Adapter Model: BN036-A12012E/BN036-A12012B/BN036-A12012U
Manufacturer: SHENZHEN HEWEISHUN NETWORK
TECHNOLOGY CO., LTD.
Input: 100-240 V AC, 50/60 Hz, 0.4 A
Output: 12 V DC, 1 A
: DC Voltage
CE Mark Warning
This is a Class B product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
Operations in the 5.15-5.25GHz band are restricted to indoor use only.
This equipment should be installed and operated with a minimum
distance 20cm between the device and your body.
Declaration of Conformity
Hereby, Shenzhen Tenda Technology Co., Ltd. declares that the radio
equipment type Mesh5 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.tendacn.com/en/service/download-cata-101.html
NOTE: ( ) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
(2) To avoid unnecessary radiation interference, it is recommended to
use a shielded RJ45 cable.
WARNING: The mains plug is used as disconnect device; the disconnect
device shall remain readily operable.
1
FCC Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Operating frequency: 2412-2462MHz, 5150-5250MHz, 5725-5850MHz
The device is for indoor usage only.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC
RF Rules.
This equipment should be installed and operated with a minimum
distance 20cm between the device and your body.
Caution:
Adapter Model: BN052-A09009U/BN052-A09009E/BN052-A09009B
Manufacturer: SHENZHEN HEWEISHUN NETWORK
TECHNOLOGY CO., LTD.
Input: 100-240 V AC, 50/60 Hz, 0.3 A
Output: 9 V DC, 1 A
: DC Voltage
Caution:
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be
RECYCLING
Declaration of Conformity
Hereby, Shenzhen Tenda Technology Co., Ltd. declares that the radio
equipment type Mesh3f is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.tendacn.com/en/service/download-cata-101.html
For EU/EFTA, this product can be used in the following countries:
caused by unauthorized modifications to this equipment. (2) To avoid
unnecessary radiation interference, it is recommended to use a shielded
RJ45 cable.
NOTE:
(1) The manufacturer is not responsible for any radio or TV interference
Hong Kong hotline: 00852-81931998
Website: http://www.tendacn.com
Email: support.nova@tenda.com.cn
Canada hotline: 1-888-998-8966
Toll Free: Mon - Fri 9 am - 6 pm PST
Operating Frequency:
2.4 GHz: EU/2400-2483.5MHz (CH1-CH13)
5 GHz: EU/5150-5250MHz (CH36-CH48)
EIRP Power (Max.):
2.4 GHz: 19.5 dBm 5 GHz: 22 dBm
Software Version: V1.0.0.X
Operating Frequency:
2.4 GHz: EU/2400-2483.5MHz (CH1-CH13)
5 GHz: EU/5150-5250MHz (CH36-CH48)
EIRP Power (Max.):
2.4 GHz: 19.67 dBm 5 GHz: 22.21 dBm Software Version: V1.0.0.X
USA hotline: 1-800-570-5892
Toll Free: Daily-9am to 6pm EST
AC1200 Whole Home Mesh WiFi System
Model Mesh5
Power 12V 1A
FCC ID V7TMESH5
IC 9034A-MESH5
MAC
SN
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This decive may not cause harmful interference.
(2) this decive must accept any interference received,
including interference that may cause undesired operation.
SSID:
NOVA_XXXX
Password:
12 V 1 A power
adapter
Done.
WAN/LAN
Mesh5 x 1
9 V 1 A power adapter x 2
Quick installation guidex1Ethernet cablex 1
Package contents
12 V 1 A power adapter x 1
Mesh3f x 2
RST
PWRLAN
WAN/LAN
Tips
CAN ICES-3(B)/NMB-3(B)
handled pursuant to European directive 2012/19/EU in order to be recycled
or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling
organization or to the retailer when he buys new electrical or electronic
equipment.

Imate li pitanja o Tenda Nova MW5s?

Ovdje jednostavno postavite pitanje koje imate o Tenda Nova MW5s drugim vlasnicima proizvoda. Navedite jasan i sveobuhvatan opis problema i svoje pitanje. Što bolje opišete svoj problem i pitanje, drugi vlasnici Tenda Nova MW5s će Vam jednostavnije dati dobar odgovor.

Specifikacije proizvoda

Brend Tenda
Model Nova MW5s
Proizvod Pristupna točka
EAN 6932849428063
Jezik Engleski
Grupa proizvoda Pristupne točke
Vrsta datoteke PDF
Dizajn
Tip proizvoda Prije✗sni ruteri
Boja uređaja Bijelo
Indikacijska lampica
Boja uređaja Bijelo
Tipka za poništenje
Certifikacija FCC, CE, RoHS, EAC, IC
Postavljanje Stolni
LED indikatori Signal strength, System
WAN priključak
Ethernet WAN
DSL WAN
Utor za SIM karticu
Kompatibilnost s 3G/4G USB modemom
Značajke bežične LAN mreže
Wi-Fi pojas Dvofrekvencijski (2, 4 GHz / 5 GHz)
Vrhunski Wi-Fi standard Wi-Fi 5 (802.11ac)
WLAN brzina prijenosa podataka(maks) 867Mbit/s
WLAN brzina prijenosa podataka (prvi pojas) 300Mbit/s
WLAN brzina prijenosa podataka (drugi pojas) 867Mbit/s
Wi-Fi standarde 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Antena
Tip antene Unutarnji
Razina antenskog pojačanja (max) 3dBi
Broj antena 2
Tip antene Unutarnji
Razina antenskog pojačanja (max) 3dBi
Broj antena 2
Više-smjerna
Integrated antenna
Mreža
Ethernet LAN veza
Vrsta Ethernet LAN sučelja Gigabit Ethernet
brzine prijenosa podataka putem Ethernet LANa 10, 100, 1000Mbit/s
Tehnologija kabliranja 10/100/1000Base-T(X)
Mrežni standard IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11v, IEEE 802.3, IEEE 802.3u
Port forwarding
Dodjeljivanje VLAN-a temeljem SSID-a
Statička ruta
Podrška za VPN IPsec pass through, PPTP pass through, L2TP pass through
Značajke
Mogućnost nadogradnje firmwarea
Certifikacija FCC, CE, RoHS, EAC, IC
brzine prijenosa podataka putem Ethernet LANa 10, 100, 1000Mbit/s
Mrežni standard IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11v, IEEE 802.3, IEEE 802.3u
2,4 GHz
5 GHz
867Mbit/s
300Mbit/s
Maksimalna brzina prijenosa podataka 1200Mbit/s
MIMO
Vrsta MIMO-a Multi User MIMO
Mobilno umrežavanje
3G
4G
Napajanje
Vrsta napajanja DC
Ulazni napon izmjenične struje 100 - 240V
Ulazna frekvencija izmjenične struje 50/60Hz
Izlazni napon 12V
Izlazna struja 1A
Podrška za napajanje putem Etherneta (PoE)
Izlazni napon 12V
Izlazna struja 1A
Podrška za napajanje putem Etherneta (PoE)
Ulazni napon 100 - 240V
Ulazna frekvencija 50/60Hz
Ulazna struja 0.6A
Radni uvjeti
Raspon radne temperature (T-T) 0 - 40°C
Dozvoljeni raspon temperatura za skladištenje (T-T) -40 - 70°C
Opseg relativne vlažnosti pri radu (H-H) 10 - 90%
Raspon relazivne vlažnosti pri skladištenju 5 - 90%
Raspon radne temperature (T-T) 0 - 40°C
Dozvoljeni raspon temperatura za skladištenje (T-T) -40 - 70°C
Opseg relativne vlažnosti pri radu (H-H) 10 - 90%
Raspon relazivne vlažnosti pri skladištenju 5 - 90%
Priključci i sučelja
Broj Ethernet LAN (RJ-45) priključaka 2
USB priključak
Utor(i) za memorijsku karticu
Ulazni DC strujni priključak
Broj Ethernet LAN (RJ-45) priključaka 2
Ulazni DC strujni priključak
Broj USB 2.0 priključaka 0
WAN priključak Ethernet (RJ-45)
Težina i dimenzije
Širina 91mm
Dubina 91mm
Visina 93mm
Širina 91mm
Dubina 91mm
Visina 93mm
Značajke za upravljanje
Tipka za poništenje
Mogućnost nadogradnje firmwarea
Sigurnost
Podržani sigurnosni algoritmi WPA2-PSK
Vatrozid
Vatrozidna zaštita UDP flood attack defence, TCP flood attack defence, ICMP flood attack defence
Anonimni pristup
Podržani sigurnosni algoritmi WPA2-PSK
Podrška za VPN IPsec pass through, PPTP pass through, L2TP pass through
SSID broadcast
Podaci o ambalaži
Broj uključenih proizvoda 3kom
Tip ambalaže Kutija
Strujni adapter isporučen uz proizvod
Priloženi kabeli LAN (RJ-45)
Vodič za brzu instalaciju
Broj uključenih proizvoda 3kom
Tip ambalaže Kutija
Strujni adapter isporučen uz proizvod
Priloženi kabeli LAN (RJ-45)
Protokoli
DHCP klijent
DHCP poslužitelj
Universal Plug and Play (UPnP)
DHCP klijent
DHCP poslužitelj
Universal Plug and Play (UPnP)
Ostale značajke
Vatrozidna zaštita UDP flood attack defence, TCP flood attack defence, ICMP flood attack defence
Učinak
Kompatibilni operacijski sustavi Android 4.0+, iOS 8+