Dispose of used battery promptly. Keep the lithium
battery out of the reach of children. Should the
battery be swallowed, immediately consult a doctor.
Wipe the battery with a dry cloth to assure a good
Be sure to observe the correct polarity when
installing the battery.
Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Do not expose the battery to excessive heat such as
direct sunlight, fire or the like.
When the unit will be left unplugged for a long time,
remove the battery to avoid undue battery discharge
and damage to the unit from battery leakage.
Setting the clock for the
This unit is preset to the current date and time at the
factory, and is powered by the back up battery. All you
need to do the first time is just plug it in and select
your time zone.
1Plug in the unit.
“month and date” (about 1 second) “year”
(about 1 second) “the current EST/EDT
(Eastern Standard/Daylight Time)” appears in the
2Press TIME ZONE.
Area number “2” appears in the display.
If you live in the Eastern Time zone, you do not
need to adjust the area setting.
Area numberTime zone
1Atlantic Standard/Daylight Time
Eastern Standard/Daylight Time
3Central Standard/Daylight Time
4Mountain Standard/Daylight Time
5Pacific Standard/Daylight Time
6Yukon Standard/Daylight Time
7Hawaiian Standard/Daylight Time
3Press TIME ZONE repeatedly until the
desired number appears.
The display returns to the clock about 4 seconds
after the operation is complete.
During the shipment and your first use, a clock error
may occur. In this case, refer to “Setting the clock and
date” to set the correct time.
When daylight saving time
(summer time) begins
The following models employ the Automatic Daylight
Saving Time/Summer Time adjustment. The DST
indicator in the display appears in the display at the
beginning of the daylight saving time (summer time),
and disappears at the end of it.
Daylight saving time begins at: 2:00 AM on the
second Sunday of March.
Standard time begins at: 2:00 AM on the first
Sunday of November.
To cancel the Automatic DST/
Summer Time adjustment and to
set DST display manually
The Automatic DST/Summer Time adjustment can be
Press and hold DST for more than 3 seconds
while the clock is displayed.
A beep sounds, and “Aut OFF” appears in the
display to show that the Automatic DST/Summer
Time adjustment is cancelled. The display returns to
The change timing of Automatic DST/Summer
Time adjustment employed by the unit (see above) is
subjected to variation by circumstances and the law
in each country/region. In such a case, cancel the
Automatic DST/Summer Time adjustment and set
DST display manually as necessary. The customer
who lives in the country/region that has not
introduced the daylight saving time (summer time)
must cancel Automatic DST/Summer Time
adjustment before using the set.
To activate the Automatic DST/Summer Time
adjustment again, press and hold DST for more than
3 seconds. A beep sounds, and “Aut On” appears
in the display to show that the Automatic DST/
Summer Time adjustment is activated. The display
returns to the clock.
To change the display to the daylight saving time
(summer time) manually, see “To change the display
to the daylight saving time (summer time)
Setting the clock and
To change the setting manually, follow the procedure
from step 1.
1Press CLOCK for more than 2 seconds.
You will hear a beep and the year will start to flash
in the display.
2Press + or – until the correct year appears in
4Repeat steps 2 and 3 to set the month, day
After setting the time, two short beep sound and
the clock starts from 0 seconds.
Pressing and holding
+ or – changes the year, month
or day rapidly.
When setting the current time, time changes rapidly
by 1 minute-increments up to 10 minutes, and then
by 10 minute-increments.
While setting the clock, you must perform each step
within 65 seconds, or the clock setting mode will be
To display the year and date
Press SNOOZE/DATE/SLEEP OFF once for the
date, and within about 3 seconds press it again
for the year.
The display shows the date or year for about 3 seconds
and then changes back to the current time.
If you connect the AC plug to AC outlet while this unit
is powered from the backup power source, the current
date and time appears in the following order. (It is
same as when the unit is powered on after the power
“month and date” (about 1 second) “year” (about
To change the display to the
daylight saving time (summer
Change the daylight saving time (summer time)
adjustment setting according to the following
procedures if you have cancelled the Automatic DST/
Summer Time adjustment.
DST indicator appears in the display and the time
indication changes to the daylight saving time
To deactivate the daylight saving time (summer time)
adjustment, press DST again.
Setting the brightness
of the display
Three levels of brightness are available by
Playing the radio
1Press RADIO ON to turn on the radio.
2Adjust volume using VOLUME.
4Tune in to a station using TUNING.
To turn off the radio
Press RADIO OFF/ALARM RESET.
The AC power cord functions as an FM antenna.
Extend the AC power cord fully to increase
Rotate the unit horizontally for optimum reception.
A ferrite bar AM antenna is built-in to the unit.
Do not operate the unit over a steel desk or metal
surface, as this may lead to interference of reception.
Setting the alarm
The dual alarm function allows you to set two alarm
programs (ALARM A and ALARM B).
The alarm time can be set for each program and the
alarm sound is selectable from RADIO or BUZZER.
Before setting the alarm, make sure to set the clock
(see “Setting the clock and date”).
The factory setting alarm time is “PM 12:00”.
To set the radio alarm, first tune in to a station and
adjust the volume (see “Playing the radio”).
When you set the buzzer alarm, set
VOLUME to LOW or HIGH.
To set the alarm time
1Set ALARM A (or B) to the desired alarm
sound (RADIO or BUZZER).
The alarm time appears for a few seconds, and
then the A (or B) indicator lights up in the
display. (It does not appear when the switch is set
2Turn ALARM TIME SET A (or B) + or – to
set the desired time.
Each turn of ALARM TIME SET A (or B) + or –
changes the indication by 1 minute. If you turn
and hold ALARM TIME SET A (or B) + or –, the
alarm time goes forward (or backward) by
1 minute up to 10 minutes, and then by
10 minutes increments. While setting the alarm
time, the A (or B) indicator flashes in the
display. The following example is when setting the
When the alarm time setting operation is
complete, the display returns to the clock after a
few seconds and the A (or B) indicator
changes from flashing to fully lit.
ALARM A (or B) is set to RADIO or BUZZER,
the alarm time setting can be changed by ALARM
TIME SET A (or B).
One turn of ALARM TIME SET A (or B) displays the
alarm time for about 4 seconds. By turning ALARM
TIME SET A (or B) while the alarm time appears in
the display, the alarm time will be changed.
A (or B) indicator flashes in the display
– The alarm time appears in the display.
– The alarm sounds.
– Snooze function is turned on.
The alarm time setting cannot be changed if
A (or B) is set to OFF. If ALARM TIME SET A (or B)
is turned, “OFF” appears in the display for about
If a second alarm sounds during a first (or the
snooze function is active), the second alarm takes
CLOCK, DST, and TIME ZONE are unavailable while
the alarm sounds or snooze function is turned on.
ALARM VOLUME setting works together with
the beep sound volume. If the ALARM VOLUME is
set to LOW, the beep sound will be also set to low.
The alarm function works as usual at the beginning
and end day of the daylight saving time (summer
time). While the Automatic DST/Summer Time
adjustment is set, as a result, if the alarm is set at a
time skipped when the daylight saving time
(summer time) begins, the alarm is skipped, or if the
alarm is set at a time overlapped when the daylight
saving time (summer time) ends, the alarm sounds
If the same alarm time is set for both alarm
(ALARM A and B), the ALARM A takes priority.
To doze for a few more minutes
Press SNOOZE/DATE/SLEEP OFF.
The sound turns off but will automatically come on
again after about 10 minutes. Each time you press
SNOOZE/DATE/SLEEP OFF, the snooze time changes
The maximum length of the snooze time is
The display shows the snooze time for about
4 seconds and returns to show the current time. When
you press SNOOZE/DATE/SLEEP OFF after the
current time appears, the snooze time starts from
10 minutes again.
To stop the Alarm
Press RADIO OFF/ALARM RESET to turn off
The alarm will come on again at the same time the
If RADIO OFF/ALARM RESET is not pressed, the
alarm sounds continuously for about 60 minutes, and
then it will be stop automatically.
To deactivate the Alarm
Turn ALARM A (or B) to OFF.
A (or B) indicator disappears from the display.
Note on alarm in the event of a power
In the event of a power interruption, alarm functions
work until the battery is empty. But following
functions are different:
Display will disappear.
When the alarm sound is set to RADIO, it will
change to BUZZER automatically.
If the power returns while the alarm sounds, the
alarm sounds continuously for about 60 minutes
when the power returns.
The alarm buzzes for about one minute, stops
temporarily, and will buzz again after about five
minutes if neither SNOOZE/DATE/SLEEP OFF or
RADIO OFF/ALARM RESET are pressed while the
alarm is buzzing.
If the alarm buzzes and stops (either automatically
after 1 minute or by pressing SNOOZE/DATE/
SLEEP OFF) five times, the alarm is automatically
reset in the case of a power interruption. The alarm
will buzz for 30 minutes after power is resumed if
the power is resumed within 60 minutes from the
If you press
SNOOZE/DATE/SLEEP OFF while the
alarm sounds, snooze time is set to 10 minutes.
During a power failure, snooze time cannot be set to
more than 10 minutes.
” indicator appears in the display, the alarm
will not work in the event of power interruption.
Replace the battery if “
” indicator appears.
Setting the sleep timer
You can fall asleep to the radio using the built-in sleep
timer that turns off the radio automatically after a
The radio turns on. You can set the sleep timer to
durations of 90, 60, 30, or 15 minutes. Each press
changes the display as follows:
Two short beeps sound when the display returns to
The radio will play for the duration you set, then shut
To turn off the radio before the
Press RADIO OFF/ALARM RESET or
To use both sleep timer and alarm
You can fall asleep to the radio and also be awakened
by the radio or buzzer alarm at the preset time.
1Set the alarm. (See “Setting the alarm”.)
2Set the sleep timer. (See “Setting the sleep
About the backup
To keep good time, as backup power source, this unit
has one CR2032 battery inside of the unit in addition
to the house current.
The battery keeps the clock and the alarm operating in
the event of a power interruption.
Knowing when to replace the
When the battery becomes weak, “
appears in the display.
In the event of a power interruption when the battery
is weak, current time and alarm functions will be
Replace the battery with a Sony CR2032 lithium
battery. Use of another battery may present a risk of
fire or explosion.
Installing and replacing the
1Keep the AC plug connected to the AC
outlet, remove the screw that secures the
battery compartment at the bottom of the
unit using a screwdriver, and remove the
battery compartment. (See Fig. -)
2Insert a new battery in the battery
compartment with the side facing up.
To remove the battery from the battery
compartment, push it out from the side marked
PUSH. (See Fig. -)
3Insert the battery compartment back into
the unit and secure it with the screw.
(See Fig. -)
4When you are replacing the battery, press
RADIO ON to turn “
” indicator off in the
If you replace the battery, do not disconnect AC plug
from AC outlet.
Otherwise, current time and alarm will be initialized.
Broj pitanja: 0
Imate li pitanja u vezi s proizvodom ICF-C318S trgovačke marke Sony ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda ICF-C318S trgovačke marke Sony pravilno odgovoriti na vaše pitanje.
Informacije o Sony ICF-C318S
Ovdje besplatno pogledajte priručnik za proizvod ICF-C318S trgovačke marke Sony. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 7.6. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski. Imate li pitanja u vezi s proizvodom ICF-C318S trgovačke marke Sony ili vam treba pomoć? Ovdje postavite svoje pitanje