Sony ICF-C1PJ

Sony ICF-C1PJ priručnik

(2)
  • ICF-C1PJ_CED/CEK [GB/ES] 4-528-478-23(1)
    Getting Started
    Connecting the AM
    loop antenna
    The shape and the length of the antenna is
    designed to receive AM signals. Do not
    dismantle or roll up the antenna.
    1 Raise the plastic stand and fit the
    antenna into the slot of the stand.
    Press the
    antenna into
    the stand
    until it clicks.
    Plastic stand
    2 Insert the AM antenna connector into
    the AM ANTENNA jack on the unit.
    To remove the AM loop
    antenna
    Push and hold down the tab of the antenna
    terminal clamp, and remove the AM loop
    antenna.
    Connecting to an AC
    power source
    Connect the AC power cord to a wall outlet.
    To wall outlet
    day and month” (about 2 seconds) “year”
    (about 2 seconds) current CET (Central
    European Time) or current WET (Western
    European Time)” appears on the display in turn.
    (This unit is preset to the current CET (except
    for UK model) or the current WET (for UK
    model) at the factory, and is powered by the
    back-up battery.)
    Setting the clock
    All you need to do to set the clock for the first
    time is select your time zone.
    Except for UK model
    The unit is set to the current CET (Central
    European Time) as a default. If you live in
    the Central European Time zone, you do
    not need to perform this operation.
    If you want to change the Automatic DST/
    summer time adjustment settings, refer to
    About Automatic DST/summer time
    adjustment.
    For UK model
    The unit is set to the current WET (Western
    European Time) as a default. If you live in
    the Western European Time zone, you do
    not need to perform this operation.
    If you want to change the Automatic DST/
    summer time adjustment settings, refer to
    About Automatic DST/summer time
    adjustment.
    1 Press and hold TIME ZONE for more
    than 2 seconds.
    Area number “1:00” or “0:00” appears on
    the display.
    2 Press VOL/SET + or repeatedly to
    select a number as follows:
    Except for UK model
    Area
    number
    Time zone
    Automatic DST/
    summer time
    adjustment
    “0:00” Western
    European Time
    (GMT±0:00)
    Initial
    setting: On
    “1:00”
    (default)
    Central
    European Time
    (GMT+1:00)
    “2:00” Eastern
    European Time
    (GMT+2:00)
    For UK model
    Area
    number
    Time zone
    Automatic DST/
    summer time
    adjustment
    “0:00”
    (default)
    Western
    European Time
    (GMT±0:00)
    Initial
    setting: On
    “1:00” Central
    European Time
    (GMT+1:00)
    “2:00” Eastern
    European Time
    (GMT+2:00)
    “4:00” Gulf Standard
    Time
    (GMT+4:00)
    Initial
    setting: Off
    “8:00” Hong Kong Time
    (GMT+8:00)
    3 Press SNOOZE/BRIGHTNESS/ENTER
    to set.
    If you live in a country/region other
    than in these time zones
    Refer to “Setting the clock manually” to set the
    correct time.
    Note
    During shipment and your first use, a clock
    error may occur. In this case, refer to “Setting
    the clock manually” to set the correct time.
    About Automatic DST/
    summer time adjustment
    This unit is equipped with a DST/summer time
    adjustment function. When this function is
    turned on, the unit automatically adjusts for
    daylight saving time (summer time). “DST”
    automatically appears on the display at the
    beginning of daylight saving time (summer
    time), and disappears at the end of daylight
    saving time (summer time).
    The Automatic DST/summer time adjustment
    is based on GMT (Greenwich Mean Time).
    Area number “0:00”:
    
    Daylight saving time (summer time) begins
    at 1:00 AM on the final Sunday of March.
    
    Standard time begins at 2:00 AM on the final
    Sunday of October.
    Area number “1:00”:
    
    Daylight saving time (summer time) begins
    at 2:00 AM on the final Sunday of March.
    
    Standard time begins at 3:00 AM on the final
    Sunday of October.
    Area number “2:00”:
    
    Daylight saving time (summer time) begins
    at 3:00 AM on the final Sunday of March.
    
    Standard time begins at 4:00 AM on the final
    Sunday of October.
    Area number “4:00” (for UK model):
    
    Daylight saving time (summer time) begins
    at 2:00 AM on the final Sunday of March.
    
    Standard time begins at 3:00 AM on the final
    Sunday of October.
    Area number “8:00” (for UK model):
    
    Daylight saving time (summer time) begins
    at 2:00 AM on the final Sunday of March.
    
    Standard time begins at 3:00 AM on the final
    Sunday of October.
    Note
    
    The implementation of DST/summer time
    and its beginning/ending date and time are
    subject to circumstances and laws in each
    country/region. Should this interfere with the
    desired adjustment, cancel the Automatic
    DST/summer time adjustment and set the
    clock manually as necessary. Customers
    living in a country/region that does not use
    daylight saving time (summer time) should
    cancel the Automatic DST/summer time
    adjustment before using the unit.
    Switching the Automatic
    DST/summer time
    adjustment function on or off
    You can turn the Automatic DST/summer
    time adjustment function on or off.
    Press and hold DST for more than 2
    seconds.
    The display will show Aut On”
    (Automatic DST/summer time adjustment
    is turned on) or Aut OFF” (Automatic
    DST/summer time adjustment is turned
    off).
    Operations
    Setting the clock
    manually
    To change the clock setting manually, operate
    the unit as follows.
    1 Press and hold SET TIME/DATE for
    more than 2 seconds.
    The year will start to flash on the display.
    2 Press VOL/SET + or repeatedly to
    select the year, and then press
    SNOOZE/BRIGHTNESS/ENTER.
    3 Repeat step 2 to set the month, day
    and time.
    After setting the time, a beep will sound.
    Notes
    If you do not press any button for about 1
    minute while setting the clock, clock setting
    mode will be canceled.
    A 100-year calendar (2013 - 2112) is installed
    in the system.
    To change the time format
    You can choose between the 24-hour system
    (default) or the 12-hour system to display the
    time.
    Press and hold ALARM RESET/OFF and
    SNOOZE/BRIGHTNESS/ENTER for about
    3 seconds.
    The time format toggles between the 24-hour
    system (“0:00” = midnight) and the 12-hour
    system (“AM 12:00” = midnight).
    To display the date and year
    Press SET TIME/DATE once to display the day
    and month, and press again to display the year.
    To return to the current time display, press SET
    TIME/DATE once again; or after a few seconds
    the clock display will return automatically.
    When daylight saving time
    (summer time) begins/ends
    while Automatic DST/summer
    time adjustment is set to off
    Change the clock setting manually if you have
    canceled the Automatic DST/summer time
    adjustment.
    Using the projector
    The projector function allows you to display the
    clock and the currently used alarm icons on a
    nearby wall or ceiling at a range of 0.5 m – 4 m.
    1 Rotate the projector unit to point the
    projector lens in the desired direction.
    2 Press PROJECTION.
    3 Turn FOCUS to adjust the focus.
    To turn off the projector, press PROJECTION
    again.
    To rotate the projection view
    Press ROTATE PROJECTION repeatedly.
    Each time you press ROTATE PROJECTION, the
    projection view rotates as Fig. .
    Notes
    
    Do not stare into the lens directly.
    
    The projector function cannot be used unless
    the clock has been set.
    
    Certain walls and ceilings may not display
    the projection properly.
    
    The projector unit can be rotated 90° forward
    or backward from the upward position, and
    clicks when returned to the upward position.
    
    If the projector unit is rotated beyond its
    limits, it may be damaged.
    
    The projector will automatically turn off after
    16 hours.
    Listening to the radio
    1 Press AM/FM/NATURE SOUND
    repeatedly to select the desired band
    (AM or FM).
    2 Press TUNING + or to tune to the
    desired station.
    If you press and hold TUNING + or ,
    scanning starts. Scanning pauses when a
    station is found, and restarts after a few
    seconds. To stop scanning, press TUNING +
    or (or SNOOZE/BRIGHTNESS/ENTER).
    3 Press VOL/SET + or to adjust the
    volume.
    To turn off the radio, press ALARM RESET/
    OFF.
    Note
    
    The FM frequency display is accurate to
    within 0.1MHz. For example, frequencies
    88.00MHz and 88.05MHz will both be
    displayed as “88.0MHz.
    To preset radio stations
    You can preset 5 stations for FM and 5 stations
    for AM.
    1 Tune to the station you wish to preset.
    2 Press and hold the desired NATURE
    SOUND/PRESET (1 to 5) until you hear
    a beep.
    Example: The following display appears
    when you preset FM 105.7 MHz to preset
    number 3 for FM.
    The display shows the frequency for a few
    seconds and then changes back to the
    current time.
    To change the preset station, tune to the
    desired station and press and hold the
    NATURE SOUND/PRESET (1 to 5) until you
    hear a beep.
    Note
    
    If you try to store another station with the
    same preset number, the previously stored
    station will be replaced.
    To tune to a preset station
    1 Press AM/FM/NATURE SOUND
    repeatedly to select the desired band
    (AM or FM).
    2 Press NATURE SOUND/PRESET (1 to 5)
    where the desired station is stored.
    3 Press VOL/SET + or to adjust the
    volume.
    Note
    
    If no station has been preset yet, “Non”
    appears on the display. Then the unit returns
    to the same state as in step 1.
    English
    Before operating the unit, please read this
    guide thoroughly and retain it for future
    reference.
    For customers in Europe
    Register now for free updates at :
    www.sony-europe.com/myproducts
    WARNING
    Do not ingest the battery,
    Chemical Burn Hazard.
    This product contains a coin/button cell
    battery. If the coin/button cell battery is
    swallowed, it can cause severe internal burns in
    just 2 hours and can lead to death.
    Keep new and used batteries away from
    children.
    If the battery compartment does not close
    securely, stop using the product and keep it
    away from children.
    If you think batteries might have been
    swallowed or placed inside any part of the
    body, seek immediate medical attention.
    Hereby, Sony Corporation declares that this
    equipment is in compliance with Directive
    2014/53/EU.
    The full text of the EU declaration of conformity
    is available at the following internet address:
    http://www.compliance.sony.de/
    Do not expose batteries or apparatus with
    battery-installed to excessive heat such as
    sunshine, fire or the like.
    The nameplate and important information
    concerning safety are located on the bottom
    exterior.
    CAUTION
    Danger of explosion if battery is incorrectly
    replaced. Replace only with the same type.
    This symbol is intended to alert the
    user to the presence of important
    operating and maintenance (servicing)
    instructions in the literature
    accompanying the appliance.
    Notice for customers: the following
    information is only applicable to
    equipment sold in countries applying
    EU directives.
    This product has been manufactured by or on
    behalf of Sony Corporation, 1-7-1 Konan
    Minato-ku Tokyo, 108-0075 Japan. Inquiries
    related to product compliance based on
    European Union legislation shall be addressed
    to the authorized representative, Sony Belgium,
    bijkantoor van Sony Europe Limited, Da
    Vincilaan 7-D1, 1935 Zaventem, Belgium. For
    any service or guarantee matters, please refer
    to the addresses provided in the separate
    service or guarantee documents.
    The validity of the CE marking is restricted to
    only those countries where it is legally
    enforced, mainly in the countries EEA
    (European Economic Area).
    Disposal of waste batteries and
    electrical and electronic equipment
    (applicable in the European Union and
    other European countries with separate
    collection systems)
    This symbol on the product, the
    battery or on the packaging
    indicates that the product and the
    battery shall not be treated as
    household waste. On certain
    batteries this symbol might be
    used in combination with a chemical symbol.
    The chemical symbols for mercury (Hg) or lead
    (Pb) are added if the battery contains more
    than 0.0005% mercury or 0.004% lead. By
    ensuring these products and batteries are
    disposed of correctly, you will help prevent
    potentially negative consequences for the
    environment and human health which could
    otherwise be caused by inappropriate waste
    handling. The recycling of the materials will
    help to conserve natural resources.
    In case of products that for safety, performance
    or data integrity reasons require a permanent
    connection with an incorporated battery, this
    battery should be replaced by qualified service
    staff only. To ensure that the battery and the
    electrical and electronic equipment will be
    treated properly, hand over these products at
    end-of-life to the applicable collection point for
    the recycling of electrical and electronic
    equipment. For all other batteries, please view
    the section on how to remove the battery from
    the product safely. Hand the battery over to the
    applicable collection point for the recycling of
    waste batteries. For more detailed information
    about recycling of this product or battery,
    please contact your local Civic Office, your
    household waste disposal service or the shop
    where you purchased the product or battery.
    WARNING
    
    Battery may explode if handled incorrectly.
    Do not recharge, disassemble or dispose of
    in fire.
    
    Dispose of used battery promptly and in
    accordance with local environmental laws
    and guidelines. Keep away from children.
    License and Trademark
    Notice
    No Power No Problem™ is a trademark of Sony
    Corporation.
    Precautions
    
    Operate the unit on the power sources
    specified in “Specifications.
    
    To disconnect the power cord (mains lead),
    pull it out by the plug, not the cord.
    
    Do not leave the unit in a location near a
    heat source, such as a radiator or airduct, or
    in a place subject to direct sunlight, excessive
    dust, mechanical vibration, or shock.
    
    Allow adequate air circulation to prevent
    internal heat build-up. Do not place the unit
    on a surface (a rug, blanket, etc.) or near
    materials (a curtain) that might block the
    ventilation holes.
    
    Should any solid object or liquid fall into the
    unit, unplug the unit and have it checked by
    a qualified personnel before operating it any
    further.
    
    To clean the casing, use a soft dry cloth. Do
    not use any type of solvent, such as alcohol
    or benzine, which may damage the finish.
    NOTES ON LITHIUM BATTERY
    
    Dispose of used battery promptly. Keep the
    lithium battery out of the reach of children.
    Should the battery be swallowed,
    immediately consult a doctor.
    
    Wipe the battery with a dry cloth to assure a
    good contact.
    
    Be sure to observe the correct polarity when
    installing the battery.
    
    Do not hold the battery with metallic
    tweezers, otherwise a short-circuit may
    occur.
    
    Do not expose the battery to excessive heat
    such as direct sunlight, fire or the like.
    If you have any questions or problems
    concerning your unit, please consult your
    nearest Sony dealer.
    Selecting a Nature
    Sound
    This unit includes 5 types of Nature Sounds:
    Sea Waves, Birds, Rain, Brook, and Under the
    Sea.
    1 Press AM/FM/NATURE SOUND
    repeatedly to select the Nature Sound.
    2 Press the desired NATURE SOUND/
    PRESET (1 to 5).
    Icons Sound type
    Sea Waves
    Birds
    Rain
    Brook
    Under the Sea
    To turn off the Nature Sound, press ALARM
    RESET/OFF.
    Note
    
    When other functions are in use, Nature
    Sounds are not available.
    Setting the alarm
    The dual alarm function allows you to set two
    alarm programs (ALARM A and ALARM B).
    The alarm time can be set for each program
    and the alarm sound can be selected from
    “RADIO” (radio), “BUZZ” (buzzer), or “NATURE”
    (Nature Sound).
    Before setting the alarm
    
    Make sure to set the clock. (See “Setting the
    clock manually.”)
    
    To set the radio alarm, first preset your
    favorite station. (See “To preset radio
    stations.”)
    1 Press and hold SET ALARM/ALARM A
    (or B) for more than 2 seconds.
    While setting the alarm, A” (or “B”) flashes
    on the display.
    2 Press VOL/SET + or to select the
    desired hour, and press SNOOZE/
    BRIGHTNESS/ENTER.
    3 Press VOL/SET + or to select the
    desired minute, and press SNOOZE/
    BRIGHTNESS/ENTER.
    4 Press VOL/SET + or to select the
    desired alarm period (“WEEKDAY,
    “WEEKEND, or every day*), and press
    SNOOZE/BRIGHTNESS/ENTER.
    * In the case of every day, both
    “WEEKDAY” and “WEEKEND” are
    displayed.
    5 Press VOL/SET + or to select the
    desired alarm mode (“RADIO, “BUZZ,
    or “NATURE”), and press SNOOZE/
    BRIGHTNESS/ENTER.
    When selecting “RADIO”
    Proceed to “ Setting the radio alarm.
    When selecting “BUZZ”
    The setting is complete. The buzzer will
    sound at the set time, gradually increasing
    in volume. (“A” (or “B”) flashes on the
    display.)
    When selecting “NATURE”
    Proceed to “ Setting the Nature Sound
    alarm.
    Setting the radio alarm
    6 Press VOL/SET + or to select the AM
    band or FM band, and press SNOOZE/
    BRIGHTNESS/ENTER.
    7 Press VOL/SET + or (or NATURE
    SOUND/PRESET (1 to 5)) to select the
    preset number of desired station, and
    press SNOOZE/BRIGHTNESS/ENTER.
    If no station has been preset yet
    The preset number and “Non” appear on
    the display alternately. In this case, the
    buzzer will sound at the set time.
    8 Press VOL/SET + or to adjust the
    volume, and press SNOOZE/
    BRIGHTNESS/ENTER.
    The setting is complete. The radio will turn
    on at the set time, gradually increasing in
    volume. (“A” (or “B”) flashes on the display.)
    Setting the Nature Sound alarm
    6 Press VOL/SET + or (or NATURE
    SOUND/PRESET (1 to 5)) to select the
    desired Nature Sound, and press
    SNOOZE/BRIGHTNESS/ENTER.
    7 Press VOL/SET + or to adjust the
    volume, and press SNOOZE/
    BRIGHTNESS/ENTER.
    The setting is complete. The Nature Sound
    will sound at the set time, gradually
    increasing in volume. (“A” (or “B”) flashes on
    the display.)
    To stop the alarm
    Press ALARM RESET/OFF to turn off the
    alarm.
    The alarm will sound again at the same time
    the next weekday or the next weekend.
    To doze for a few more minutes
    Press SNOOZE/BRIGHTNESS/ENTER.
    The sound turns off, but will automatically
    come on again after about 10 minutes.
    Each time you press SNOOZE/BRIGHTNESS/
    ENTER, the snooze time changes as follows:
    The display shows the snooze time for a few
    seconds and returns to show the current time.
    (“A (or “B”) flashes on the display.)
    To deactivate the alarm
    Press SET ALARM/ALARM A (or B).
    A (or “B”) disappears from the display.
    To change an alarm setting
    Set the alarm again.
    Tips
    
    When the alarm setting is complete, the
    alarm time setting is displayed.
    
    If you press and hold SNOOZE/BRIGHTNESS/
    ENTER for more than 2 seconds while setting
    the alarm, the alarm setting is immediately
    complete.
    Notes
    
    If a second alarm sounds during a first (or
    the snooze function is active), the second
    alarm takes priority.
    
    If the same alarm time is set for both ALARM
    A and ALARM B, ALARM A takes priority.
    
    If no operation is performed while the alarm
    is sounding, the alarm will stop after about
    60 minutes.
    
    When Automatic DST/summer time
    adjustment is set, the alarm sounds as
    follows:
    – If the alarm is set to a time that is
    skipped as a result of daylight saving
    time starting, the alarm will sound when
    daylight saving time is applied.
    – If the alarm is set to a time that is
    doubled as a result of daylight saving
    time ending, the alarm will sound twice.
    Notes on the alarm in the event of a
    power interruption
    In the event of a power interruption, the alarm
    functions work until the battery is fully
    discharged. But certain functions may be
    affected as follows:
    
    The display will disappear.
    
    If the alarm sound is set to “RADIO” or
    “NATURE,” the buzzer will sound.
    
    If a power interruption occurs while the
    alarm is sounding, the buzzer will sound.
    
    If ALARM RESET/OFF is not pressed, the
    alarm will sound for about 5 minutes.
    
    If “
    appears on the display, the alarm will
    not sound in the event of a power
    interruption. Replace the battery if
    appears.
    
    The snooze function will not work.
    
    During a power interruption, the alarm will
    sound only once at the set time.
    Setting the sleep
    timer
    You can fall asleep to the radio or Nature
    Sound using the sleep timer, which turns off
    the radio or Nature Sound automatically after a
    preset duration.
    Press SLEEP while the radio or Nature
    Sound is playing.
    “SLEEP” appears on the display.
    Each time you press SLEEP, the duration (in
    minutes) changes on the display as follows:
    The radio or Nature Sound will play for the
    duration you set, then shut off.
    To deactivate the sleep timer, press SLEEP
    repeatedly to set the sleep timer to “OFF.
    To turn off the radio or Nature
    Sound before the preset time
    Press ALARM RESET/OFF.
    To use both the sleep timer and
    alarm
    You can fall asleep to the radio or Nature
    Sound and also be awakened by the alarm at
    the preset time.
    Set the alarm, then set the sleep timer.
    Tip
    
    When you press SLEEP while the sleep timer
    is activated, the remaining time appears on
    the display.
    Note
    
    When the alarm is set to sound during the
    sleep timer duration, the sleep timer will be
    deactivated automatically when the alarm
    sounds.
    Setting the brightness
    of the display
    Three levels of brightness are available.
    Press SNOOZE/BRIGHTNESS/ENTER.
    Each time you press SNOOZE/BRIGHTNESS/
    ENTER, the brightness of the display changes
    as follows:
    Tip
    
    You can also set the brightness of the display
    to off by pressing and holding SNOOZE/
    BRIGHTNESS/ENTER.
    Notes
    
    When the alarm is sounding or the snooze
    function is active, the brightness of the
    display cannot be changed.
    
    Even if the brightness is set to off, the display
    lights at a low brightness level when the
    alarm sounds.
    Charging a
    smartphone
    You can charge a smartphone by connecting it
    to the unit using a USB cable (not supplied).
    Smartphone
    USB cable supplied
    with the smartphone
    Notes
    
    There is no guarantee that this unit can be
    used to charge all products that can be
    charged via USB.
    
    This unit does not support power feeds
    greater than 5 V/1.5 A.
    
    Check the charge status on the smartphone.
    
    If a warning tone sounds, remove the
    smartphone from the unit.
    
    The reception sensitivity on the radio may
    worsen when charging a smartphone via
    USB.
    General information
    About the battery as a
    backup power source
    This unit contains a CR2032 battery as a backup
    power source to keep the clock and the alarm
    operating during a power interruption. (No
    Power No Problem system)
    When to replace the
    battery
    When the battery is discharged, ” appears
    on the display.
    If a power interruption occurs while the battery
    is discharged, the current time and alarm will
    be erased.
    Note for customers in Europe
    
    The clock is preset at the factory, and its
    memory is powered by the preinstalled Sony
    CR2032 battery. If the “0:00” flashes on the
    display when the unit is connected to AC
    outlet for the first time, the battery may be
    discharged. In this case, consult a Sony
    dealer. The preinstalled CR2032 battery is
    considered part of the product, and is
    covered by the warranty. You are required to
    show “Note for customers in Europe” (in this
    instruction) to a Sony dealer in order to
    validate the warranty for this product.
    Replacing the backup
    battery
    1 Keep the AC plug connected to the
    wall outlet, then open the battery
    compartment on the bottom of the
    unit.
    Fully loosen
    the screw.
    Push the tab
    and pull up
    the lid.
    2 Remove the old battery by sliding it
    out and picking it up.
    3 Insert a new battery into the battery
    compartment with the side facing
    up.
    CR2032
    4 Replace the battery compartment lid
    and tighten the screw.
    5 Press AM/FM/NATURE SOUND to
    remove “
    from the display.
    Notes
    
    When you replace the battery, do not
    disconnect the AC plug from the wall outlet.
    Otherwise, the current date and time, alarm,
    and station presets will be erased.
    
    If the clock is erased while you are replacing
    the battery, set the clock again. (See “Setting
    the clock manually.”)
    
    If the unit will be left unplugged for a long
    time, remove the battery to avoid any
    damage that may be caused by leakage or
    corrosion.
    Troubleshooting
    Should any problems persist after you have
    made the following checks, consult your
    nearest Sony dealer.
    The clock flashes “0:00” or AM 12:00”
    after a power interruption.
    
    The battery is discharged. Remove the old
    battery and insert a new one.
    Unsatisfactory reception
    
    Extend the FM wire antenna fully to increase
    reception sensitivity.
    
    Connect the supplied AM loop antenna to
    the unit. Rotate the antenna horizontally for
    optimum reception.
    
    Do not place the AM loop antenna near the
    unit or other AV equipment, as noise may
    result.
    
    Keep digital music players or mobile phones
    away from the AM loop antenna or the FM
    antenna, as this may lead to reception
    interference.
    The alarm does not sound at the preset
    alarm time.
    
    Check that A” or “B” appears on the display.
    The radio or Nature Sound alarm is
    activated but no sound is emitted at
    the preset alarm time.
    
    Check the alarm volume setting.
    When daylight saving time (summer
    time) begins, the clock does not switch
    to daylight saving time (summer time)
    automatically.
    
    Make sure the clock is set correctly.
    
    When “Aut On” appears on the display
    after pressing and holding DST for more than
    2 seconds, the Automatic DST/summer time
    function becomes active.
    Specifications
    Time display
    Switch between the 24-hour system (default)
    and the 12-hour system.
    Frequency range
    Band Frequency Channel step
    FM 87.5 MHz – 108 MHz 0.05MHz
    AM 531 kHz – 1,602 kHz 9kHz
    Intermediate frequency
    FM: 128 kHz
    AM: 45 kHz
    Speaker
    Approx. 4.0 cm dia., 8 Ω
    Power output: 700 mW (at 10% harmonic
    distortion)
    Power requirements
    230 V AC, 50 Hz
    For clock back up: 3 V DC, one CR2032 battery
    USB power output
    USB port (DC OUT 5 V 1.5 A)
    Nature Sounds
    Sea Waves, Birds, Rain, Brook, Under the Sea
    Dimensions
    Approx. 114.5 mm 104 mm 100.5 mm
    (w/h/d) including projecting parts and controls
    Mass
    Approx. 625 g including CR2032 battery
    Supplied accessories
    AM loop antenna (1)
    Design and specifications are subject to
    change without notice.
    Display
    Projector unit
    Projector lens
    NATURE SOUND/PRESET
    AC power cord
    FM wire antenna
    Use the tactile dots on VOL/SET + and TUNING + and the tactile characters on 3
    (NATURE SOUND/PRESET) and ALARM RESET/OFF as a guide when operating the
    unit.
    FM/AM Clock Radio
    Operating Instructions
    Manual de instrucciones (En el reverso)
    ©2014 Sony Corporation Printed in China
    4-528-478-23(1)
    ICF-C1PJ

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom ICF-C1PJ trgovačke marke Sony ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda ICF-C1PJ trgovačke marke Sony pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod ICF-C1PJ trgovačke marke Sony. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 2 prosječnom ocjenom od 6.2. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski, Španjolski. Imate li pitanja u vezi s proizvodom ICF-C1PJ trgovačke marke Sony ili vam treba pomoć?

Značajke proizvoda ICF-C1PJ trgovačke marke Sony

Brend Sony
Model ICF-C1PJ
Proizvod Radio sat
EAN 0027242875333, 0042111817658, 0272428753336, 4905524960624, 4548736035546, 7963114570759, 4754478572564, 0111486891508, 0700115637503, 0700115635967, 0700115638036, 0700115636353, 0793494563839, 0702679478929, 0696720761910, 0702679479025, 0163121512873, 7426801262219, 0702679478936, 0700115637510, 0700115638029, 0132018521779
Jezik Engleski, Španjolski
Vrsta datoteke PDF
Značajke
Boja proizvoda Srebro
AM antena
FM antena
Sat
Funkcija drijemanja
Budilica
Zvonce
Ostale značajke
Pokazatelj datuma
Digitalni tuner
Promjer zvučnika 4mm
FM radio
Zaslon LCD
Zvučnici
Ugrađeni zvučnici
Radio
FM frekvencijski pojas 87.5 - 108MHz
Tip radija Sat
Tip tunera Digital✗
Težina i dimenzije
Širina 101mm
Visina 102mm
Dubina 101mm
Težina 490g
Baterija
Vrsta baterije
Napon baterije 3V
Napajanje
Ulazna frekvencija izmjenične struje 60Hz

Srodni proizvodi proizvodu ICF-C1PJ trgovačke marke Sony

    Povezani priručnici za proizvode

    Radio sat Sony

    Dodaj priručnik

    Imate li priručnik koji želite dodati?