Sigma 30mm f1.4 EX DC HSM

Sigma 30mm f1.4 EX DC HSM priručnik

(1)
  • Thank you very much for purchasing a Sigma Lens. In order to get the maximum
    performance and enjoyment out of your Sigma lens, please read this instruction
    booklet thoroughly before you start to use the lens.
    DESCRIPTION OF THE PARTS (fig.1)
    Filter Attachment Thread Focus Mode Switch
    Focus Ring
    (SIGMA SA / CANON AF / FOUR THIRDS)
    Distance Scale Mount
    Focus Index Line Lens Hood
    DC LENS
    These are special lenses that are designated for digital cameras because the lens
    image circle is designated to correspond to the size of the image sensors of most
    digital SLR cameras. The specialized design gives these lenses the ideal properties
    for digital cameras.
    An image sensor element larger than those corresponding to APS-C cannot be
    used in digital cameras or 35mm SLR cameras. If such an element is used
    vignetting will occur on the picture surface.
    If you use SD14, SD10 or SD9 digital cameras, corresponding angle of view will be
    51mm.
    ATTACHING TO CAMERA BODY
    When this lens is attached to the camera body it will automatically function in the
    same way as your normal lens. Please refer to the instruction booklet for your
    camera body.
    On the lens mount surface, there are a number of couplers and electrical contacts.
    Please keep them clean to ensure proper connection. To avoid damaging the lens,
    be especially sure to place the lens with its front end down while changing the lens.
    Many accessories such as rear mounted teleconverters, extension tubes, etc., are
    specially made for designated lenses. Before you purchase such accessories,
    please check your Sigma lens to determine that it is compatible and that the
    accessories will function properly with it.
    SETTING THE EXPOSURE MODE
    The sigma lens functions automatically after mounting to your camera. Please,
    refer to the camera instruction book.
    FOCUSING
    FOR SIGMA AF, CANON AF, NIKON AF AND FOUR THIRDS
    This lens features Sigma’s built-in Hyper Sonic Motor (HSM). The HSM enables
    quick and quiet autofocusing.
    For autofocus operation, set the focus mode switch on the lens to “AF” position
    (fig.2) (for Nikon AF, select the autofocus mode on your camera body) (For
    Four-Thirds, select the autofocus mode on your camera body and set the focus
    mode switch on the lens to the “AFposition).
    If you wish to focus manually, set the focus mode switch on the lens to the “M
    position.
    (for Nikon AF, select the manual focus mode on your camera body as you would do
    normally) (For Four-Thirds, select the manual focus mode on your camera body and
    set the focus mode switch on the lens to the “M” position). You can adjust the focus
    by turning the focus ring.
    This lens also permits manual focusing even in the autofocus mode. With the
    camera set to the One-Shot AF (AF-S) mode, you can adjust focus manually after
    the lens autofocus (and stops), while the shutter button is pressed halfway. (In
    the case of Four-Thirds fitting, the setting method varies depending on the camera
    body. Please follow the instruction manual of your camera body.)
    When operating this lens in manual focus mode, it is recommended that correct
    focus be confirmed visually in the viewfinder rather than relying on the distance
    scale. This is due to possible focus shift resulting from extreme changes in
    temperature which cause various components in the lens to expand and contact.
    Special allowance is made for this at the infinity setting.
    FOR SONY AF AND PENTAX AF
    For autofocus operation, set the camera’s focus mode to AF.
    If you wish to focus manually, set the camera’s focus mode to “MF” and adjust the
    focus by turning the focus ring.
    To avoid damaging AF mechanism, please do not turn the focus ring manually
    while in the autofocus mode.
    When operating this lens in manual focus mode, it is recommended that correct
    focus be confirmed visually in the viewfinder rather than relying on the distance
    scale. This is due to possible focus shift resulting from extreme changes in
    temperature which cause various components in the lens to expand and contact.
    Special allowance is made for this at the infinity setting.
    LENS HOOD
    A bayonet type detachable hood is provided with the lens. This lens hood helps to
    prevent flare and ghosted images caused by bright illumination from outside the
    picture area. Attach the hood and turn clockwise until it stops rotation. (fig.3)
    When taking photographs using the built-in flash, it is advisable to remove the lens
    hood so as to avoid cutting off any of the flash output, which could cause a
    shadow in the picture.
    In order to place the lens and hood into the storage case, you must first remove
    the hood, then replace it on the lens in the reverse position. (fig.4)
    FILTER
    Only one filter should be used at the time. Two or more filters and/or special
    thicker filters, like a polarizing filter, may cause vignetting.
    When using a polarizing filter with AF camera, use the “circular” type.
    BASIC CARE AND STORAGE
    Avoid any shocks or exposure to extreme high or low temperatures or to humidity.
    For extended storage, choose a cool and dry place, preferably with good
    ventilation. To avoid damage to the lens coating, keep away from mothballs or
    naphthalene gas.
    Do not use thinner, benzine or other organic cleaning agents to remove dirt or
    finger prints from the lens elements. Clean by using a soft, moistened lens cloth
    or lens tissue.
    This lens is not waterproof. When you use the lens in the rain or near water, keep
    it from getting wet. It is often impractical to repair the internal mechanism, lens
    elements and electric components damaged by water.
    Sudden temperature changes may cause condensation or fog to appear on the
    surface of the lens. When entering a warm room from the cold outdoors, it is
    advisable to keep the lens in the case until the temperature of the lens approaches
    room temperature.
    TECHNICAL SPECIFICATIONS
    Lens construction 7 - 7
    Angle of View 45°
    Minimum Aperture 16
    Minimum Focusing Distance 40cm (1.31 ft)
    Magnification 1:10.4
    Filter Size 62mm
    Dimensions Dia.×Length 76.6×59mm (3.02×2.32 in)
    Weight 400g (14.1 oz)
    Dimensions and weight include the SIGMA mount.
    ENGLISH
    The CE Mark is a Directive conformity mark of the European
    Community (EC).
    SIGMA (Deutschland) GmbH Carl-Zeiss-Str. 10/2, D-63322 Rödermark, F.R.GERMANY
    Verkauf: 01805-90 90 85-0 Service: 01805-90 90 85-85 Fax: 01805-90 90 85-35
Sigma 30mm f1.4 EX DC HSM

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom 30mm f1.4 EX DC HSM trgovačke marke Sigma ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda 30mm f1.4 EX DC HSM trgovačke marke Sigma pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod 30mm f1.4 EX DC HSM trgovačke marke Sigma. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 8.5. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski. Imate li pitanja u vezi s proizvodom 30mm f1.4 EX DC HSM trgovačke marke Sigma ili vam treba pomoć? Ovdje postavite svoje pitanje

Značajke proizvoda 30mm f1.4 EX DC HSM trgovačke marke Sigma

Brend Sigma
Model 30mm f1.4 EX DC HSM
Proizvod Leća
Jezik Engleski
Vrsta datoteke PDF
Težina i dimenzije
Težina 430g
Duljina 59mm
Promjer 75.5mm
Veličina filtra 62mm
Ostale značajke
Uvećanje 1:10.4x
Dizajn
Boja proizvoda Cr✗
Optički sustav
Dijagonalni kut gledanja (max) 45°
Broj oštrica 8
Broj asferičnih elemenata 7

Povezani priručnici za proizvode

Leća Sigma