Sigma 18-125mm F3.5-5.6 DC OS HSM

Sigma 18-125mm F3.5-5.6 DC OS HSM priručnik

(1)
  • Thank you very much for purchasing a Sigma Lens. In order to get the maximum
    performance and enjoyment out of your Sigma lens, please read this instruction
    booklet thoroughly before you start to use the lens.
    DESCRIPTION OF THE PARTS (fig.1)
    DC LENS
    These are special lenses that are designated for digital cameras because the lens image
    circle is designated to correspond to the size of the image sensors of most digital SLR
    cameras. The specialized design gives these lenses the ideal properties for digital cameras.
    An image sensor element larger than those corresponding to APS-C cannot be used in
    digital cameras or 35mm SLR cameras. If such an element is used vignetting will occur
    on the picture surface.
    If you use SD14 or SD10 or SD9 digital camera, corresponding angle of view will be
    30-212mm.
    ATTACHING TO CAMERA BODY
    When this lens is attached to the camera body it will automatically function in the same way
    as your normal lens. Please refer to the instruction booklet for your camera body.
    On the lens mount surface, there are a number of couplers and electrical contacts.
    Please keep them clean to ensure proper connection. To avoid damaging the lens, be
    especially sure to place the lens with its front end down while changing the lens.
    The sigma lens functions automatically after mounting to your camera. Please, refer to the
    camera instruction book.
    FOCUSING AND ZOOMING
    For autofocus operation, set the focus mode switch on the lens to “AF” position.
    If you wish to focus manually, set the focus mode switch on the lens to the “MF” position.
    You can adjust the focus by turning the focus ring.
    In the case of Pentax fit, Auto Focus can only be used with HSM compatible camera
    models. Other camera models can be used in Manual Focus only.
    To avoid damaging AF mechanism, please do not turn the focus ring manually while in
    the autofocus mode.
    When operating this lens in manual focus mode, it is recommended that correct focus be
    confirmed visually in the viewfinder rather than relying on the distance scale. This is
    due to possible focus shift resulting from extreme changes in temperature which cause
    various components in the lens to expand and contact. Special allowance is made for
    this at the infinity setting.
    Zooming
    Rotate the Rubber grip on the zoom ring to the desired position.
    Zoom Lock Switch
    This lens is also equipped with Zoom Lock Switch to eliminate the zoom creep when the
    lens is tilted down. Please set zooming ring to 18mm and set the zoom lock switch to the
    LOCK” position. (fig.2)
    MAGNIFICATION
    The indication of the lens as 1:xxon a focusing distance scale represent the magnification
    (commonly called the reproduction ratio). For example when you are in focus at the
    1:3.8” position on the scale, a subject with an actual size of 3.8cm will have an image size
    of 1cm on the firm. (fig.3)
    ABOUT OS (OPTICAL STABILIZER) FEATURES
    This OS lens effectively compensates for image blurring caused by camera shake. Using
    the Optical Stabilizer function it is possible to get sharp results at shutter speeds
    approximately 3-4 stops slower than you could without using the OS function.
    Set the OS switch to ON (fig.4). Press the shutter button halfway down, confirm the image
    in the viewfinder is stable then take the picture. (It takes approximately 1 second to produce
    a stable image from the time of depressing the shutter button halfway).
    Sony and Pentax fittings are not equipped with the Optical Stabilizer (OS) function.
    Do not use the Optical Stabilizer in the following situations:
    When the lens is mounted on a tripod. ▪ When using the camera in Bulb mode.
    The Optical Stabilizer function is powered from the camera. If the OS lens is attached to
    your camera and activated, shooting capacity of your camera will be lower than with
    conventional lenses used with the same camera. If you are not using OS, please turn
    OFF the OS switch, in order to prevent unnecessary battery consumption.
    Be sure to turn the OS switch to the OFF position before attaching or detaching the lens
    to the camera.
    The OS continues to operate after you release your finger from the shutter button, as
    long as the exposure meter displays the exposure value. Never remove the lens or
    remove the camera’s battery while the image stabilizer is operating as this could damage
    the lens.
    Although the viewfinder image may appear to shake immediately after shooting and/or at
    the start of the flash charge cycle of the camera’s built-in flash, it will not cause any effect
    to the pictures.
    If the lens is detached from camera or the camera power is turned off while the OS
    function is in operation, the lens may emit a chattering noise, but this is not a malfunction.
    LENS HOOD
    A bayonet type detachable hood is provided with the lens. This lens hood helps to prevent
    flare and ghosted images caused by bright illumination from outside the picture area.
    Attach the hood and turn clockwise until it stops rotation. (fig.5)
    When taking photographs using the built-in flash, it is advisable to remove the lens hood so
    as to avoid cutting off any of the flash output, which could cause a shadow in the picture.
    In order to place the lens and hood into the storage case, you must first remove the
    hood, then replace it on the lens in the reverse position. (fig.6)
    FILTER
    Only one filter should be used at the time. Two or more filters and/or special thicker
    filters, like a polarizing filter, may cause vignetting.
    When using a polarizing filter with AF camera, use the “circulartype.
    BASIC CARE AND STORAGE
    Avoid any shocks or exposure to extreme high or low temperatures or to humidity.
    For extended storage, choose a cool and dry place, preferably with good ventilation. To
    avoid damage to the lens coating, keep away from mothballs or naphthalene gas.
    Do not use thinner, benzine or other organic cleaning agents to remove dirt or finger
    prints from the lens elements. Clean by using a soft, moistened lens cloth or lens tissue.
    This lens is not waterproof. When you use the lens in the rain or near water, keep it
    from getting wet. It is often impractical to repair the internal mechanism, lens elements
    and electric components damaged by water.
    Sudden temperature changes may cause condensation or fog to appear on the surface
    of the lens. When entering a warm room from the cold outdoors, it is advisable to keep
    the lens in the case until the temperature of the lens approaches room temperature.
    TECHNICAL SPECIFICATIONS
    Lens construction
    12 – 16
    Angle of View
    69.311.4°
    Minimum Aperture
    22
    Minimum Focusing Distance
    0.35m (1.15 ft)
    Magnification
    1:3.8
    Filter Size
    67mm
    Dimensions Dia.×Length
    74×88.5mm (2.91×3.48 in)
    Weight
    505g (17.8 oz)
    Dimensions and weight include the SIGMA mount.
    The CE Mark is a Di
    rective conformity mark of the European
    Community (EC).
    SIGMA (Deutschland) GmbH Carl-Zeiss-Str. 10/2, D-63322 Rödermark, F.R.GERMANY
    Verkauf: 01805-90 90 85-0 Service: 01805-90 90 85-85 Fax: 01805-90 90 85-35
    Filter Attachment Thread
    Focus Ring
    Distance Scale
    Focus Index Line
    Zoom Ring
    Focus Mode Switch
    Mount
    Zoom Lock Switch
    OS Switch (SIGMA, Conon, Nikon)
    Lens Hood
    ENGLISH
Sigma 18-125mm F3.5-5.6 DC OS HSM

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom 18-125mm F3.5-5.6 DC OS HSM trgovačke marke Sigma ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda 18-125mm F3.5-5.6 DC OS HSM trgovačke marke Sigma pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod 18-125mm F3.5-5.6 DC OS HSM trgovačke marke Sigma. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 9.9. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski. Imate li pitanja u vezi s proizvodom 18-125mm F3.5-5.6 DC OS HSM trgovačke marke Sigma ili vam treba pomoć? Ovdje postavite svoje pitanje

prirucnici.hr

Tražite priručnik? prirucnici.hr osigurava da u trenu pronađete priručnik koji tražite. Naša baza podataka sadrži više od milijun PDF priručnika za više od 10,000 robnih marki. Svaki dan dodajemo najnovije priručnike pa ćete uvijek pronaći proizvod koji tražite. Vrlo je jednostavno: samo u tražilicu upišite naziv robne marke i vrstu proizvoda i odmah ćete vidjeti priručnik po svom izboru na Internetu, besplatno.

prirucnici.hr

© Autorska prava 2020 prirucnici.hr. Sva prava pridržana.