NuTone CP2AFAB

NuTone CP2AFAB priručnik

(1)
  • 1
    WIRED / WIRELESS
    DOOR CHIME
    PUSHBUTTON
    To register this product, visit: www.nutone.com
    THIS PACKAGE INCLUDES:
    n Cast Metal Escutcheon
    n Wired Pushbutton
    n Wireless Pushbutton and Battery
    n Mounting Hardware
    WIRED PUSHBUTTON INSTALLATION
    WARNING
    TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY
    TO PERSONS, OBSERVE THE FOLLOWING:
    Use this unit only in the manner intended by the manufacturer. If you
    have questions, contact the manufacturer at the address or telephone
    number listed in the warranty.
    Before servicing or cleaning unit, switch power off at service panel and
    lock the service disconnecting means to prevent power from being
    switched on accidentally. When the service disconnecting means
    cannot be locked, securely fasten a prominent warning device, such
    as a tag, to the service panel.
    Installation work and electrical wiring must be done by a qualified
    person(s) in accordance with all applicable codes and standards,
    including fire-rated construction codes and standards.
    When cutting or drilling into wall or ceiling, do not damage electrical
    wiring and other hidden utilities.
    Use NuTone
    ®
    16 volt transformer with a minimum rating of 10 VA
    (purchase separately).
    When stapling wires to studs or joists, do not allow staples to cut
    through wire insulation.
    1. Select pushbutton location
    and drill a straight and
    level 3/4” (19 mm) hole, 1”
    (25 mm) deep.
    2. Make sure that push button
    assembly (A) is inserted
    fully into escutcheon (B).
    (Figure 1) Install chime
    and transformer wires to
    pushbutton terminals.
    3. Install escutcheon/
    pushbutton assembly
    into hole and secure with
    hardware provided.
    4. Restore power at service entrance and press pushbutton to sound
    chime.
    INSTALLATION & OPERATING INSTRUCTIONS
    READ AND SAVE THESE INSTRUCTIONS
    WIRELESS PUSHBUTTON
    INSTALLATION
    The wireless pushbutton (C) is compatible with NuTone wireless
    chimes. (Purchase separately) Refer to installation instructions
    provided with wireless chime.
    1. Open battery cover (D)
    by sliding it in direction
    indicated by arrow.
    (Figure 2)
    2. Install battery (E) into
    wireless pushbutton.
    (Figure 3)
    3. Remove wired pushbutton
    mechanism from pushbutton /
    escutcheon assembly by
    turning pushbutton mechanism
    counterclockwise and pulling it
    out. (Figure 4)
    4. Insert wireless
    pushbutton
    mechanism and
    twist clockwise.
    (Figure 5)
    5. Test operation.
    Hold wireless
    pushbutton near
    chime and press
    pushbutton. If
    chime does not
    sound - see a.
    through c. on
    page 2.
    FIGURE 1
    B
    A
    FIGURE 4
    1
    2
    FIGURE 5
    1
    2
    FIGURE 2
    FIGURE 3
    C
    D
    E
    + -
NuTone CP2AFAB

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom CP2AFAB trgovačke marke NuTone ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda CP2AFAB trgovačke marke NuTone pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod CP2AFAB trgovačke marke NuTone. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 8.3. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski, Španjolski. Imate li pitanja u vezi s proizvodom CP2AFAB trgovačke marke NuTone ili vam treba pomoć? Ovdje postavite svoje pitanje

Značajke proizvoda CP2AFAB trgovačke marke NuTone

Brend NuTone
Model CP2AFAB
Proizvod Kućno zvono
Jezik Engleski, Španjolski
Vrsta datoteke PDF

Povezani priručnici za proizvode

Kućno zvono NuTone