Myfox TA4007

Myfox TA4007 priručnik

  • 1. Description and functionality
    User Instructions
    Internet user interface
    GR PT
    NL PL
    Battery protection tab
    Remove the tab to power the sensor and trigger the connection to the main unit.
    The sensor operates with two AA LR6 alkaline batteries.
    It detects when the batteries are low and alerts the user.
    Light sensor function
    The sensor measures the ambient light and sends the reading to the main unit.
    The user is invited to select a reference threshold from five possible choices, configurable in the user interface,
    from full brightness to total darkness.
    This threshold can be adjusted at any time and home automation scenarios can therefore be linked to reaching or
    exceeding the chosen threshold:
    Full brightness: strong luminosity from direct exposure to the sun or a strong light fixture
    Daylight: ambient brightness in the middle of the day
    Low light: ambient brightness which might not be sufficient for comfortable reading
    Twilight: light level requiring the use of light fixtures
    Darkness: absence of light
    Warning: for optimum light measurement, the sensor must be placed far from any light source that could affect the
    readings, such as television sets, computer screens, night lights, etc.
    Wall-mounting plate or standing on a surface
    The sensor can be secured to its wall-mounting plate or can stand on a flat surface. The face with the sensor's
    reading eye must be the most exposed to light.
    In the wall-mounted position, the sensor is clipped to its plate when the plate is properly mounted.
    Check that it is properly fastened by listening for a "click" when it snaps into place.
    The plate and sensor must be kept away from any risk of contact with water and electricity.
    Temperature sensor function
    The sensor measures the ambient temperature to within one tenth of a degree and sends it to the main
    Home automation scenarios can therefore be linked to reaching or exceeding a temperature threshold.
    Warning: for optimum temperature measurement, the sensor must be placed far from any heat source
    that could affect the readings.
    When sorting your waste, please observe the disposal
    regulations in force. Please place waste in the facilities provided
    for that purpose and with all due respect for the environment.
    Note: Replacing the batteries with the wrong type of battery will
    cause a risk of explosion. Dispose of used batteries in
    accordance with instructions.
    3. Battery replacement and wall mounting
    Installing the sensor on the wall: use
    double-sided adhesive strip to secure the
    plate to the wall, or use screws as follows:
    drill a hole in the wall, install the wall plug,
    and insert the screw supplied, leaving a 5-mm
    gap between the screw head and the wall.
    Place the slot on the head of the screw. The
    sensor and plate cannot be flush-mounted.
    TAG Technologies S.A.S.
    Regent Park II Bât 1 - Rue du Lac
    31670 Labège France
    © TAG Technologies. All rights reserved.
    121105 V1.1
    4. Technical characteristics
    Cat. No. : TA 4007
    Frequency: Radio 433.92 MHz
    Range: 150 m in free field
    'Battery low' supervision and alert via message from
    main unit
    Operating temperature: -10°C to +50°C
    Maximum operating altitude: 2000 m
    Impact protection factor IP 33
    Batteries: Two AA LR6 alkaline batteries
    Battery life: 2 years
    Dimensions: L 100 mm x W 50 mm x D 25 mm
    Weight: 125 g
    TAG Technologies declares that this product complies with the
    essential requirements of R&TTE Directive 1999/5/EC. A full
    version of the declaration of compliance is available from
    2. Connection to the main unit
    Go into learning mode on your main unit
    Remove the battery protection tab located behind the sensor
    The main unit emits an audible signal to confirm successful connection
    Batteries: Use a
    screwdriver to open
    the battery hatch at
    the back of the sensor,
    and insert the
    batteries in the correct
    orientation (polarity).
    HOTLINE: +33 (0)5 61 00 07 11
Myfox TA4007

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom TA4007 trgovačke marke Myfox ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda TA4007 trgovačke marke Myfox pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod TA4007 trgovačke marke Myfox. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 7.5. Ovaj je priručnik dostupan na sljedećim jezicima: Engels. Imate li pitanja u vezi s proizvodom TA4007 trgovačke marke Myfox ili vam treba pomoć? Ovdje postavite svoje pitanje

Značajke proizvoda TA4007 trgovačke marke Myfox

Brend Myfox
Model TA4007
Proizvod Nerazvrstano
EAN 3700530140067
Jezik Engels
Vrsta datoteke PDF
Tehničke pojedinosti
Tehnologija povezivanja Bežično
Svrha Unutra/vani
Tip -
Točnost 0.1 °C
Materijal ABS sintetika
Operativni radijus 150 m
Raspon mjerenja temperature -10 - 50 °C
Vrsta baterije AA LR6
Tehnologija baterije Alkalne
Broj podržanih baterija 2
Težina i dimenzije
Širina 100 mm
Dubina 25 mm
Visina 50 mm
Radni uvjeti
Dozvoljeni raspon temperatura za skladištenje (T-T) - °C
Ugrađen zaslon