Lucasey LC200C priručnik

Lucasey LC200C
(1)
  • Br.str.: 1
  • Vrsta datoteke: PDF

LC200C Ceiling Mount

for Monitors up to 32" with

up to 200mm VESA Patterns

LC200C Ceiling Flange
LC200C Flange Cover
Countersunk Screws
Lag Screws
1/4-28 x 5/16" Setscrews
1" NPT Outside Pipe
Cord Access Hole
Do Not Adjust
Past the Red Line
Inside Adjustable Pipe
Monitor Attaching Screws
Flat Washers
Monitor Not Included
VESA Plate
Do Not Remove the Safety Cable
Follow the directions provided by the monitor manufacturer
to expose the VESA mounting pattern of threaded inserts on
the back of the monitor. Attach the VESA Plate to the monitor
with Monitor Attaching Screws specified by the monitor
manufacturer. Several screw sizes are provided for
conveinience.
Predetermine the best possible viewing location for the
monitor allowing for tilt and pivot action.
Use the LC200C Ceiling Flange as a template to mark and
drill pilot holes 2-1/3" deep into the wood ceiling joist
using a 1/8" bit for each of the lag screw locations.
Attach the LC200C Ceiling Flange to the ceiling wood joist
using the provided Lag Screws. If mounting into concrete,
metal beams or at an angle, contact Lucasey for ceiling
mount accessories compatible with this mount.
Attach the LC200C Flange Cover to the LC200C Ceiling Flange
using the provided countersunk screws.
Carefully slide the Inside Adjustable Pipe, with attached
monitor, into the Outside Pipe. Adjust to the appropriate
length (Do not adjust past the red line) and tighten the
Setscrews.
If desired, run the monitor cords through the pipes using the
Cord Access Hole at the top and the hole in the bottom of the
Inside Adjustable Pipe.
Screw the Outside Pipe, with attached monitor, into the
LC200C Ceiling Flange.
Double check to make sure all fasteners, including the
adjustable pipe setscrews, are secure and tight.

Hardware List

#14 x 2-1/2" HWH Lag Screws ........................................................... 4
5/16-18 x 1-7/8" Flanged SHC Bolt ...................................................... 1
5/16-18 Nylock Nuts ............................................................................ 1
5/16" Bellville Washers ...................................................................... 2
1/4-20 x 1-1/2" Flanged SHC Bolt ........................................................ 1
1/4-20 Nylock Nuts .............................................................................. 1
1/4" Bellville Washers ......................................................................... 4
1/4-28 x 5/16" Setscrews .................................................................... 2
#10-32 x 3/4" Countersunk Screws .................................................... 2
4mm x 25mm Set Screws ... 6 4mm Hex Nuts ... 12
5mm x 30mm Set Screws ... 6 5mm Hex Nuts ... 12
6mm x 30mm Set Screws ... 6 6mm Hex Nuts ... 12
4mm x 12mm Phillips Screws ... 6 5mm Flat Washers ... 36
5mm x 12mm Phillips Screws ... 6 1/4" Flat Washers ... 18
6mm x 12mm Phillips Screws ... 6
INSTALLATION INSTRUCTIONS
LC200C_Ins (12/07) ©2005 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
Lucasey LC200C

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom LC200C trgovačke marke Lucasey ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda LC200C trgovačke marke Lucasey pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod LC200C trgovačke marke Lucasey. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 7.9. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski. Imate li pitanja u vezi s proizvodom LC200C trgovačke marke Lucasey ili vam treba pomoć? Ovdje postavite svoje pitanje

Značajke proizvoda LC200C trgovačke marke Lucasey

Općenito
Brend Lucasey
Model LC200C
Proizvod Podrška ravne ploče
Jezik Engleski
Vrsta datoteke PDF
Ergonomija
Raspon kuta nagiba -45 - 45 °
Nagib 0 - 360 °
Montiranje
Tip montaže Strop
Maksimalna težina vaganja 22 kg
Prilagođeno za ekrane minimalne veličine 22 "
Prilagođeno za ekrane maksimalne veličine 32 "
Broj podržanih zaslona 1
Minimalna VESA montaža 200 x 200 mm
Maksimalna VESA montaža 200 x 200 mm
Dizajn
Boja proizvoda Crno
prikaži više

Često postavljana pitanja

Ispod se navode najčešće postavljana pitanja u vezi s Lucasey LC200C.

Vaše pitanje nije navedeno? Ovdje postavite svoje pitanje