Harley-Davidson J04409 (2011)

Harley-Davidson J04409 (2011) priručnik

  • -J04409 2011-10-20
    FAT BOY DETACHABLE SADDLEBAGS
    GENERAL
    Kit Number
    88306-07A, 90200616A
    Models
    For model fitment information, see the P&A Retail Catalog or
    the Parts and Accessories section of www.harley-davidson.com
    (English only).
    Additional Parts Required
    All models require separate purchase of Rear Directional
    Relocation Kit P/N 69929-07.
    Models equipped with Detachable Accessories require separate
    purchase of Docking Hardware Kit P/N 88256-07.
    Models without Detachable Accessories require separate
    purchase of Docking Hardware Kit P/N 53932-03.
    Models equipped with Rigid Accessories require separate
    purchase of Docking Hardware Kit P/N 88298-07.
    Loctite® 243 (Blue) Threadlocker and Sealant P/N 99642-97.
    WARNING
    The rider's safety depends upon the correct installation of
    this kit. Use the appropriate service manual procedures.
    If the procedure is not within your capabilities or you do
    not have the correct tools, have a Harley-Davidson dealer
    perform the installation. Improper installation of this kit
    could result in death or serious injury. (00333a)
    NOTE
    This instruction sheet references service manual information.
    A service manual for your model motorcycle is required for this
    installation and is available from a Harley-Davidson Dealer.
    Kit Contents
    See Figure 8 and Table 1.
    NOTE
    Maximum saddlebag weight capacity is 10 pounds (4.5 Kg.).
    WARNING
    Federal Motor Vehicle Safety Standard (FMVSS) 108
    requires motorcycles to be equipped with rear and side
    reflectors. Be sure rear and side reflectors are properly
    mounted. Poor visibility of rider to other motorists can
    result in death or serious injury. (00336b)
    WARNING
    The rider's safety depends upon the correct installation of
    this kit. Use the appropriate service manual procedures.
    If the procedure is not within your capabilities or you do
    not have the correct tools, have a Harley-Davidson dealer
    perform the installation. Improper installation of this kit
    could result in death or serious injury. (00333a)
    INSTALLATION
    Install Turn Signal Relocation Kit
    1. Install the turn signal relocation kit using the instruction
    sheet provided in that kit.
    Docking Point Installation
    1. Refer to the instructions included with the Docking
    Hardware Kit.
    Install Rear Docking Adapter
    NOTE
    This procedure only applies to models not equipped with
    detachable accessories.
    1. See Figure 1. Insert rear docking adapter (1) into holes in
    saddlebag bracket and hold into place.
    2. Install rear docking adapter using screw (2) and nut (3).
    Tighten snugly.
    3. Repeat for other saddlebag.
    3
    2
    1
    is05092
    Rear docking adapter1.
    Screw2.
    Nut3.
    Figure 1. Install Rear Docking Adapter
    1 / 6
    Many Harley-Davidson® Parts & Accessories are made of plastics and metals which can be recycled.
    -J04409
    Please dispose of materials responsibly.

Imate li pitanja o Harley-Davidson J04409 (2011)?

Ovdje jednostavno postavite pitanje koje imate o Harley-Davidson J04409 (2011) drugim vlasnicima proizvoda. Navedite jasan i sveobuhvatan opis problema i svoje pitanje. Što bolje opišete svoj problem i pitanje, drugi vlasnici Harley-Davidson J04409 (2011) će Vam jednostavnije dati dobar odgovor.

Ovdje besplatno pročitajte Harley-Davidson J04409 (2011) priručnik. Pročitali ste priručnik, ali odgovara li on na Vaše pitanje? Postavite onda svoje pitanje na ovoj stranici drugim vlasnicima Harley-Davidson J04409 (2011).