This Chrome Passenger Footpeg Support is designed for
installation on 2005 FLSTN Softail
This kit consists of the following components:
QTY DESCRIPTION PART NO.
2 Retaining Ring 11304
2 Footpeg Clevis Pin 42680-01
2 Passenger Footrest Support 51050-05
The rider’s safety depends upon the correct installation
of this kit. If the procedure is not within your capabilities
or you do not have the correct tools, have a Harley-
Davidson dealer perform the installation. Improper
installation of this kit could result in death or serious
The footrest pegs must fold up at a 45° angle (from ver-
tical) toward rear of motorcycle. This angle allows
footrest pegs to fold up if they strike the ground when
making a sharp turn. Failure to set footpegs to the prop-
er fold-up angle could result in death or serious injury.
A Service Manual for your model motorcycle is available
from any Harley-Davidson Dealer.
1. See Service Parts illustration.
Remove retainer ring (1),
and footpeg clevis pin (2) from the passenger footrest (4).
Disgard both items. Retain foorrest for later use.
2 Remove and retain spring washer (3) for later use.
3. Remove and retain the hex head socket cap screw (6)
from passenger footrest support (5). Disgard passenger
Install the new passenger footrest support (5) using
hex head socket cap screw (6) previously removed.
Tighten screw to 35-45 ft-lbs (47.5-61.0 Nm).
(4) using the new footpeg cle-
vis pin (2), retainer ring (1) and retained spring washer.
7 . Repeat procedure for opposite side passenger footrest
CHROME PASSENGER FOOTPEG SUPPORT KIT