Freestyle Condition

Freestyle Condition priručnik

(1)
  • To reduce carbon foot print, these
    Freestyle instructions are printed with
    soy inks on recycled paper.
    ENGLISH
    S1. Start/stop Button
    S2. Lap/reset Button
    S3. Mode Button
    S4. Light Button
    DISPLAY MODES
    The watch has four display modes:
    NORMAL TIME, STOPWATCH,
    ALARM and TIME SETTING.
    To change from one display mode to
    another, press S3 button once.
    NOTE: In any setting mode, if there
    is no key manipulation for a few
    minutes, the watch will automati-
    cally save the entered data and exit
    the setting procedure.
    TO SET THE TIME AND CALENDAR
    1. Press S3 button to select TIME
    SETTING mode.
    2. Press S1 button to reset the
    second digits to zero. This will
    increase the time by 1 minute if
    the original setting is at 30 to 59
    seconds.
    3. Press S2 button, the hour digits
    will blink.
    4. Press S1 button to set the hour
    digits. Holding down the button
    will speed up the process.
    5. Press S2 button once, the minute
    digits will blink.
    6. Press S1 button to set the minute
    digits. Holding down the button
    will speed up the process.
    7. Follow the same pattern to set the
    month, date and day (of the week).
    8. When nished making all the set-
    tings, press S3 button to conrm.
    TO SET THE HOUR FORMAT
    In TIME SETTING mode, when
    adjusting the hour digits, the hour
    digits are displayed in the 12-hour
    format, then in the 24-hour format
    and then again in the 12-hour
    format. Therefore, please press S1
    button so many times that the hour
    digits are displayed in the required
    format. In the 12-hour format, the
    hour digits are identied by “A” for
    00:00-12:00 and with “P” for 12:00-
    00:00. Whereas in the 24-hour
    format, the hour digits are identied
    by “H”.
    TO USE THE STOPWATCH
    1. Press S3 button to select STOP-
    WATCH mode.
    2. The stopwatch will then be dis-
    played in its current state – reset,
    running, or stopped.
    3. To resume a counting, press S1
    button to resume from where it
    left off.
    4. To start a new counting, reset the
    stopwatch to zero rst.
    Press S1 button to stop counting,
    then press S2 button to reset
    counter to zero.
    For the measurement of elapsed
    time:
    In STOPWATCH mode,
    1. Press S1 button to start counting.
    2. To stop counting, press S1 button
    once. Press S1 button again to
    resume from where if left off.
    3. To reset to zero, press S1 button
    to stop counting and then press
    S2 button.
    For the measurement of split time:
    In STOPWATCH mode,
    1. Press S1 button to start counting.
    2. While the stopwatch is running,
    press S2 button once to register
    a lap. The split time of the
    registered lap will be displayed.
    The stopwatch is still running in
    the background. To display the
    currently accumulated time, press
    S2 button again.
    3. Repeat the last step until all the
    laps have been registered.
    4. To reset to zero, press S1 button
    to stop counting and then press
    S2 button.
    For the measurement of two
    nishes:
    In STOPWATCH mode,
    1. Press S1 button to start counting.
    2. While the stopwatch is running,
    press S2 button to register and
    display the time of the rst run-
    ner. The stopwatch is still running
    in the background.
    3. Press S1 button to stop and regis-
    ter the time of the second runner.
    4. Press S2 button to display the
    time of the second runner.
    5. To reset to zero, press S2 button
    again.
    NOTE: The stopwatch can count
    up to a maximum of 23 hours, 59
    minutes and 59.99 seconds.
    NOTE: You can leave the stopwatch
    running while switching over to
    other operating modes.
    TO SET THE ALARM
    1. Press S3 button to select ALARM
    mode.
    2. Press S2 button once, the hour
    digits will blink.
    3. Press S1 button to set the hour
    digits. Holding down the button
    will speed up the process.
    4. Press S2 button once, the minute
    digits will blink.
    5. Press S1 button to set the minute
    digits. Holding down the button
    will speed up the process.
    6. When nished making all the set-
    tings, press S2 button to conrm.
    NOTE: The alarm will automatically
    be activated after being set.
    TO TURN ON/OFF THE ALARM AND
    HOURLY CHIME
    In ALARM mode,
    1. Press S1 button once to activate
    the alarm. Alarm indicator (
    )
    will appear.
    2. Press again to activate the hourly
    chime. Chime indicator (
    ) will
    appear.
    3. Press the third time to activate
    both functions. Both of the indica-
    tors will appear.
    4. Press the fourth time to deacti-
    vate both functions. Both of the
    indicators will disappear.
    WHEN AN ALARM OR HOURLY
    CHIME GOES OFF
    A tune will be emitted by the hour
    when the hourly chime function is
    activated.
    A 20-second alarm tune will be
    emitted at designated time when
    the alarm is activated. To stop the
    tune, press S1, S2 or S3 button.
    By pressing S3 button, the watch
    will activate a snooze function.
    The alarm will go off again after 5
    minutes but for only once.
    TO USE THE BACKLIGHT
    Press S4 button to turn on the back-
    light for approximately 3 seconds.
    Freestyle_Condition_AG9167-R00
    CONDITION
    S1S4
    S2S3
    Freestyle_Condition-AG9167-R00.indd 2 5/23/12 3:12:12 PM
Freestyle Condition

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom Condition trgovačke marke Freestyle ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda Condition trgovačke marke Freestyle pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod Condition trgovačke marke Freestyle. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 8.8. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski, Njemački, Francuski, Španjolski, Talijanski, Portugalski, Kineski, Japanski. Imate li pitanja u vezi s proizvodom Condition trgovačke marke Freestyle ili vam treba pomoć?

Značajke proizvoda Condition trgovačke marke Freestyle

Brend Freestyle
Model Condition
Proizvod Sat
EAN 38461008594, 38461008600
Jezik Engleski, Njemački, Francuski, Španjolski, Talijanski, Portugalski, Kineski, Japanski
Vrsta datoteke PDF
Tehničke pojedinosti
Vrsta mehanizma Elektroničko
Kronograf -
Vrsta brojčanika sata LCD brojčanik
Vodootporan
Vodootporno do 50m
Otporno na udarce -
Štoperica
Funkcija alarma
Kalendar
LED pozadinsko osvjetljenje
Dizajn
Tip Ručni sat
Preporučeno za spol -
Materijal kućišta -
Boja kućišta Crve✗
Materijal narukvice Poliuretan
Boja remena Cr✗
Vrsta stakla sata -
Veličina Okruglo
Broja brojčanika sata Crve✗
Vrsta oznaka na satu Arapski brojevi
Dizajn Sport

Povezani priručnici za proizvode

Sat Freestyle