Electronics Line EL2635 priručnik

  • 2
    Figure 1: Typical Single Repeater
    EL-2635 & EL2635P Repeater & Programming keypad Repeater & Programierbedienteil Repeteur & Clavier Repeater & Keypad
    Conrad No: 1276483 & 1276484
    To prevent short circuits, this product should only be used inside and only in dry
    spaces. Do not expose the components to rain or moisture. Do not use the product
    close to a bath, swimming pool etc.
    Do not expose the components of your systems to extremely high temperatures
    or bright light sources.
    In case of improper usage or if you have altered and repaired the product
    yourself, all guarantees expire. Electronics Line does not accept responsibility in
    the case
    of improper usage of the product or when the product is used for
    purposes other
    than specified. Electronics Line does not accept responsibility for
    additional damage other
    than covered by the legal product responsibility.
    This product is not a toy. Keep out of reach of children.
    The product should only be repaired or serviced by a qualified repairman.
    Keep batteries out of the reach of children. Dispose of batteries as chemical
    waste. Never use old and new batteries or different types of batteries together.
    Remove the batteries when you are not using the system for a longer period of
    time. Check the polarity (+/-) of the batteries when inserting them in the product.
    Wrong positioning can cause an explosion.
    Only connect the adapter to the mains after checking whether the mains voltage
    is the same as the values on the identification tags. Never connect an adapter
    when it is damaged. In that case, contact your supplier.
    The EL-2635 wireless repeater is a part of the Electronics Line Secuplace series,
    operates together with the Secuplace alarm system. When you wish to
    more about the complete system, its possibilities and its settings, then
    you can
    check out the installation manual or visit www.electronics-line.com. Up to
    four repeaters
    can be registered to the control panel with 32 transmitters
    registered to each
    repeater. The repeater is powered by either 9VAC or
    12VDC with a 6V
    rechargeable backup battery pack. Registration and
    maintenance tests are
    performed using a plug-in LCD Programming Keypad
    (EL2635-P) that provides a
    comprehensive interface to the repeater.

Imate li pitanja o Electronics Line EL2635?

Ovdje jednostavno postavite pitanje koje imate o Electronics Line EL2635 drugim vlasnicima proizvoda. Navedite jasan i sveobuhvatan opis problema i svoje pitanje. Što bolje opišete svoj problem i pitanje, drugi vlasnici Electronics Line EL2635 će Vam jednostavnije dati dobar odgovor.

Ovdje besplatno pročitajte Electronics Line EL2635 priručnik. Pročitali ste priručnik, ali odgovara li on na Vaše pitanje? Postavite onda svoje pitanje na ovoj stranici drugim vlasnicima Electronics Line EL2635.