Code Corporation CodeXML M3

Code Corporation CodeXML M3 priručnik

(1)
  • Connecting with QuickConnect Code
    Scan the QuickConnect Code on the label of the CodeXML M3 Bluetooth® Modem using
    the Code Reader with which you wish to establish a paired connection. The reader and
    computer should connect within 10 seconds. The reader will beep once as con rmation,
    the modem’s LED light will become solid once the connection is established. If the reader
    does not connect, the reader will beep four times in rapid succession.
    English (Default) Universal French German
    CodeXML M3 Bluetooth® Modem Installation as a USB Keyboard
    Figure 3
    Cable Installation
    Attach the end of the USB cable to the CodeXML M3 Bluetooth® Modem (Figure 2). Plug
    the USB connector into the USB port on the computer (Figure 3). Once plugged in the
    modem’s blue LED light will ash.
    Figure 2
    Establish Mode
    Establish connection (see above), then scan the USB Mode code
    (M708_01). Scan the QuickConnect Code again. You are ready to begin
    reading bar codes and transmitting data to the computer.
    USB Cable installed to
    CodeXML M3 Bluetooth® Modem
    USB Mode
    Non-printable ASCII
    Keyboard (Crtl + character)
    Japanese
    Non-printable ASCII Keyboard
    (No Leading 0)
    Keyboard Input (USB)
    The modem is defaulted to English language keyboards. If you need to communicate in a
    different language requiring a change in keyboard settings, please scan the appropriate
    code below, after connecting to the modem:
    CodeXML M3 Blueooth® Modem Installation as a RS-232 (Serial)
    Figure 4 Figure 5
    Figure 6
    Figure 7
    Cable Installation
    Attach the end of the RS-232 cable to the CodeXML M3 Bluetooth® Modem
    (Figure 4). Connect the RS-232 adapter to the back of the computer (Figure 5).
    Connect the RS-232 cable to the power supply (Figure 6). Plug the power supply into
    a wall socket (Figure 7). Once connected the Modem’s blue LED light will turn on.
    RS-232 Cable (Left), CodeXML M3
    Bluetooth® Modem (Center), Power
    Supply (Right)
    Change Baud Rate Settings: Scan the appropriate code below, after connecting to
    the modem:
    Note: Codes only affect Baud Rate for the modem and do not affect any settings on Code Readers.
    9600
    (Default) 19200 38400
    57600 115200
    Default Modem
    settings:
    Baud Rate: 9600
    Stop Bits: 8
    Parity: None
    Stop Bits: 1
    Hardware: None
    Connecting with QuickConnect Code
    See instructions on page 2 for establishing a Bluetooth connection between the modem
    and the reader.
    Establish Mode
    Establish connection (see page 2), then scan the RS-
    232 Mode code (M661_01). Scan the QuickConnect
    Code again. You are ready to begin reading bar codes
    and transmitting data to the computer.
    RS-232 Mode
    2 C003996_03_CodeXML_M3_Modem_Quickstart
    C003996_03_CodeXML_M3_Modem_Quickstart 3
Code Corporation CodeXML M3

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom CodeXML M3 trgovačke marke Code Corporation ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda CodeXML M3 trgovačke marke Code Corporation pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod CodeXML M3 trgovačke marke Code Corporation. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 9.3. Ovaj je priručnik dostupan na sljedećim jezicima: Engels. Imate li pitanja u vezi s proizvodom CodeXML M3 trgovačke marke Code Corporation ili vam treba pomoć? Ovdje postavite svoje pitanje

Značajke proizvoda CodeXML M3 trgovačke marke Code Corporation

Općenito
Brend Code Corporation
Model CodeXML M3
Proizvod Mrežna kartica/prilagodnik
Jezik Engels
Vrsta datoteke PDF
Priključci i sučelja
Tehnologija povezivanja Bežično
Sučelje domaćina -
Sučelje Bluetooth
Ostale značajke
Veza sa računalom Da
Brzina modema 115 Kbit/s
Dizajn
Interno
Čipset -
Antena Da
Boja proizvoda Crno
Plug and Play Da
LED indikatori Da
Certifikacija CE, FCC
Mreža
Maksimalna brzina prijenosa podataka 1 Mbit/s
Bluetooth inačica 2.0+EDR
Mrežni standard -
Metoda širenja spektra FHSS
Maksimalan radni domet 10 m
Wi-Fi pojas Jednofrekvencijski (2,4 GHz)
Napajanje
Potrošnja energije 100 mA
Izlazni napon 5 V
null
Sistemski zahtjevi
Podržani Windows operativni sustavi Da
Podržani Linux operativni sustavi Da
Težina i dimenzije
Širina 69.85 mm
Dubina 81.28 mm
Visina 25.4 mm
Tehničke pojedinosti
Certifikati o održivosti RoHS
Radni uvjeti
Raspon radne temperature (T-T) 0 - 70 °C