Code Corporation CodeXML M2

Code Corporation CodeXML M2 priručnik

(1)
  • 2 C003345_01_CodeXML_Modem_Quickstart
    C003345_01_CodeXML_Modem_Quickstart 3
    Figure 3
    Cable Installation
    Attach the end of the USB cable to the CodeXML Bluetooth® Modem
    (Figure 2). Plug the USB connector into the USB port on the computer
    (Figure 3). Once connected the modem’s blue LED light will turn on.
    Establish Mode
    Scan the USB Mode code (M708_01-right). Scan
    the QuickConnect Code again. You are ready to
    begin reading bar codes and transmitting decoded
    data to the computer.
    USB Mode
    Keyboard Input (USB & PS2)
    The modem is defaulted to English language keyboards. If you need to communicate in a different
    language requiring a change in keyboard settings, please scan the appropriate code below, after
    connecting to the modem:
    CodeXML Bluetooth® Modem Installation as a USB Keyboard
    Figure 2
    USB Cable installed to
    CodeXML Bluetooth Modem
    Non-printable ASCII
    Keyboard (Crtl + character)
    Japanese
    Non-printable ASCII Keyboard
    (No Leading 0)
    Change Baud Rate Settings:
    Scan the appropriate code below, after connecting to the modem Note: These codes only affect Baud
    Rate for the modem and do not affect any settings on Code Readers.
    Default Modem
    settings:
    Baud Rate: 9600
    Stop Bits: 8
    Parity: None
    Stop Bits: 1
    Hardware: None
    Connecting with QuickConnect Code
    (for all cable types):
    Scan the QuickConnect Code on the label of the CodeXML Bluetooth®
    Modem using the Code Reader with which you wish to establish a paired
    connection to a computer. The reader and computer should easily
    connect within 10 seconds. The reader will beep once as con rmation.
    If the reader does not connect, the reader will beep four times in rapid
    succession.
    English (Default)
    Universal French
    German
    19200 38400
    57600
    115200
    1200
    2400 4800
    9600 (Default)
    CodeXML Modem Installatin with PS/2 Cable
    Cable Installation
    Attach the end of the PS/2 cable with the single connector to
    the CodeXML Modem (Figure 2 -page 2). Detach the keyboard
    from the computer and connect it to the same type connector on
    the PS/2 cable (Figure 8). Connect the other cable end to the
    computer (Figure 9). The modem is powered by the PS2 port and
    does not require a power supply. Once connected the modem’s
    blue LED light will turn on.
    Connecting with QuickConnect Code
    See instructions on page 2 for establishing a paired connection
    between the modem and the computer.
    PS/2 Cable installed to CodeXML
    Modem & Keyboard
    Figure 8
    Figure 9
    PS2 Mode
    Establish Mode
    Scan the PS2 Mode code (M660_01-right). You are
    ready to begin reading bar codes and transmitting
    decoded data
    CodeXML Modem Installation with RS-232 (Serial)
    Cable Installation
    Attach the end of the RS-232 cable to the CodeXML Bluetooth® Modem (Figure 4). Connect the RS-232
    adapter to the back of the computer (Figure 5). Connect the RS-232 cable to the power supply (Figure
    6). Plug the power supply into a wall socket (Figure 7). Once connected the Modem’s blue LED light will
    turn on.
    Connecting with QuickConnect Code
    See Page 2 for instructions to establish a paired connection between the
    Modem and the reader.
    Figure 5
    Figure 6
    Figure 7
    Figure 4
    RS-232 Cable (Left)
    CodeXML Bluetooth Modem
    (Center) Power Supply
    (Right)
    Establish Mode
    Scan the RS-232 Mode code (M661_01- right).
    Scan the QuickConnect Code again. You are
    ready to begin reading bar codes and transmitting
    decoded data to a computer.
    RS232 Mode
Code Corporation CodeXML M2

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom CodeXML M2 trgovačke marke Code Corporation ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda CodeXML M2 trgovačke marke Code Corporation pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod CodeXML M2 trgovačke marke Code Corporation. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 7.5. Ovaj je priručnik dostupan na sljedećim jezicima: Engels. Imate li pitanja u vezi s proizvodom CodeXML M2 trgovačke marke Code Corporation ili vam treba pomoć? Ovdje postavite svoje pitanje

Značajke proizvoda CodeXML M2 trgovačke marke Code Corporation

Općenito
Brend Code Corporation
Model CodeXML M2
Proizvod Mrežna kartica/prilagodnik
Jezik Engels
Vrsta datoteke PDF
Priključci i sučelja
Tehnologija povezivanja Bežično
Sučelje Bluetooth
Ostale značajke
Veza sa računalom Da
Brzina modema 115 Kbit/s
Dizajn
Interno
Čipset -
Antena Da
Boja proizvoda Crno
Plug and Play Da
LED indikatori Da
Certifikacija CE, FCC
Mreža
Maksimalna brzina prijenosa podataka 1 Mbit/s
Bluetooth inačica 2.0+EDR
Mrežni standard -
Maksimalan radni domet 10 m
Metoda širenja spektra FHSS
Wi-Fi pojas Jednofrekvencijski (2,4 GHz)
Napajanje
Potrošnja energije 100 mA
Izlazni napon 5 V
null
Sistemski zahtjevi
Podržani Windows operativni sustavi Da
Podržani Mac operativni sustavi Da
Podržani Linux operativni sustavi Da
Težina i dimenzije
Širina 69.85 mm
Dubina 81.28 mm
Visina 25.4 mm
Tehničke pojedinosti
Certifikati o održivosti RoHS
Radni uvjeti
Raspon radne temperature (T-T) 0 - 70 °C
Sadržaj ambalaže
Priloženi kabeli PS/2