Axis 5504-971

Axis 5504-971 priručnik

(1)
  • Lens Replacement - Instructions
    ENGLISH
    Instructions
    Follow these instructions to replace the lens. In order to set the focus and position the lens, the camera must be
    connected to the network. For instructions, please refer to the Installation Guide supplied with the camera.
    Important!
    Detaching/attaching the lens with force may cause irreparable damage to the lens holder, no force is needed.
    Follow the instructions below to replace the lens
    on the following models :
    AXIS M3011
    AXIS 209FD
    AXIS 209FD-R
    AXIS 209FD-R M12
    AXIS 209MFD
    AXIS 209MFD-R M12/SPLIT
    AXIS 209MFD-R
    AXIS 209MFD-R M12
    AXIS 209MFD-R M12/SPLIT
    Note: Applies to P/N 0283-00X-08 or higher
    P/N is located on the product label
    Replace the lens
    Follow these instructions to replace the lens:
    1. Remove the dome cover, see FIG.1a and FIG.1b.
    2. Unlock the lens lock screw by turning it 180°, counter-clockwise (Fig. 2).
    3. Rotate the lens counter-clockwise to detach it (Fig. 2).
    4. Carefully attach the new lens and be sure to insert it gently, no force is
    needed.
    Set the focus
    In order to set the focus and position the lens, the camera must be connected to the network. For instructions, please
    refer to the Installation Guide supplied with the camera. After installation, follow the instructions below:
    Note: Due to the dome’s refraction, the image might appear slightly out of focus once the dome has been placed. To
    compensate, focus on an object slightly closer than the intended area.
    E.g. for AXIS 209MFD 16MM lens, rotate approximately 270 degrees counter-clockwise before attaching the dome.
    1. Open the camera’s Live View page in a web browser.
    2. To adjust the focus, manually rotate the lens until the image on the Live View page is satisfactory.
    3. Gently lock the lens by turning the lens lock screw approximately 180° clockwise, until it clicks in place.
    Camera unit - AXIS 209FD
    Dome cover
    Fig.1a
    Camera unit - AXIS M3011
    Fig.1b
    Dome cover
    installed in ceiling
    Ceiling
    Lens lock screw
    Lens
    Fig.2
    Lens
    holder
Axis 5504-971

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom 5504-971 trgovačke marke Axis ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda 5504-971 trgovačke marke Axis pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod 5504-971 trgovačke marke Axis. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 5.6. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski. Imate li pitanja u vezi s proizvodom 5504-971 trgovačke marke Axis ili vam treba pomoć? Ovdje postavite svoje pitanje

Značajke proizvoda 5504-971 trgovačke marke Axis

Brend Axis
Model 5504-971
Proizvod Leća
EAN 7331021044203
Jezik Engleski
Vrsta datoteke PDF
Optički sustav
Struktura objektiva (elementi/grupe) -
Vrsta objektiva Širokokutni objektiv
Minimalna blenda 1.6
Maksimalna blenda -
Sučelje držača leća -
Komponenta za IP kamera
Fiksna fokusna duljina 8mm
Učinak
Kompatibilnost AXIS M3011\r
AXIS M3113-R\r
AXIS P3904-R\r
AXIS P3905-R\r
AXIS P3915-R
Dizajn
Boja proizvoda Cr✗
Težina i dimenzije
Promjer -mm
Veličina filtra -mm
Duljina -mm

Povezani priručnici za proizvode

Leća Axis