AMX NXD-500iW-MW priručnik

AMX NXD-500iW-MW
(1)
  • Br.str.: 2
  • Vrsta datoteke: PDF

Installation Guide

NXD-500IW 5" Water-Resistant Wall/Flush Mount Touch Panel

For more detailed installation, configuration, programming, file transfer, and operating
instructions, refer to the NXD-500i Operation/Reference Guide, available online at
www.amx.com.

Overview

The NXD-500IW widescreen color panel is designed for use in high-humidity INDOOR environments ranging between 50 and 95% relative humidity. It includes a built-in microphone, speakers, a mini-USB port for programming and audio output, and one NetLinx-programmable button. All power is supplied via Power Over Ethernet (PoE),
utilizing a PS-POE-AF PoE Injector (FG423-80) or equivalent PoE device. The
NXD-500IW comes in Mystique black (NXD-500IW-MB, FG2261-09) and Mystique
white (NXD-500IW-MW, FG2261-12).The NXD-500IW supports Intercom functionality, which allows two communicating panels (controlled by the NetLinx Master) to transmit full-duplex audio signals over a network in order to be used as an Intercom system.

Specifications

IP Rating Compliance (Indoor Use Only)

The NXD-500IW is IP Rating 51 compliant. Ingress of dust is not entirely prevented,
but it will not enter in sufficient quantity to interfere with the satisfactory operation of
the device; complete protection against contact. Dripping water (vertically falling drops) shall have no harmful effect.

Panel Connectors and Wiring

FIG. 2 shows the connectors located on the NXD-500IW Modero panel. The mini-USB port is used both for programming the touch panel and for audio output. The mini-USB port automatically detects the presence of a headphone adaptor, allowing the port to be used for headphone connectivity. For more information on connection and use of the Panel Connectors, as well as information on programming and headphone connectivity, please refer to the
NXD-500i Operation/Reference Guide, available at www.amx.com.
Front Bezel Button
The NXD-500IW has only one button on the front of the device, in the center of the bezel. This button has several uses:• Press the button once to start a previously programmed function, or to turn off the display if not previously programmed.
Press and hold the button for 6 seconds to put the device into Setup Mode.
Press and hold the button for 9 seconds to enter Calibration Mode.
• Press and hold the button for 20 seconds to reboot the panel.FIG. 1
NXD-500IW-MW 5" Modero Widescreen WallMount Touch Panel
NXD-500IW (FG2261-09/12) Specifications
Dimensions (HWD): NXD-500IW (with bezel): 4.15" x 5.59" x 1.97"
(10.50 cm x 14.20 cm x 5 cm)
CB-TP5 Rough-In/Wallbox (optional): 4.27" x 5.14" x 3.40"
(10.86 cm x 13.06 cm x 8.64 cm)
Power
Requirements:
PoE Powered - No local Power Supply needed
Max power draw: 5.5W.
Memory (Factory
default):
128 MB SDRAM
256 MB integrated Flash Memory (not upgradeable - factory
programmed)
Weight: 0.80 lbs (0.36 kg)
Certifications: FCC Part 15 Class B
•CE
IEC 60950
•RoHS
Panel LCD
Parameters:
Aspect ratio: 16 x 9
Maximum brightness (luminance): 200 cd/m2
Channel transparency: 8-bit Alpha blending
Contrast ratio: 250:1
Display colors: 256 thousand colors (18-bit color depth)
Dot/pixel pitch: 0.14 mm
Panel type: TFT Color Active-Matrix
Screen resolution: 800 x 480 pixels (HV) @ 60 Hz frame
frequency
Viewing dimensions: 4.3" x 2.58" (109.2 mm x 65.2 mm)
Active Screen Area: 4.25” x 2.55” (10.80cm x 6.48cm)
Viewing Angles: Up/Down/Left/Right: 85/85/85/85
IR Reception Angle: Horizontal: +
25° (left and right from center)
Vertical: +
15° (up and down from center)
Supported Audio
Sample Rates:
48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,
12000Hz, 11025Hz, and 8000Hz.
Intercom: Full duplex VoIP capabilities.
Front Panel Components:
Light Sensor: Photosensitive light detector for automatic adjustment of the
panel brightness.
Motion Sensor
(PIR):
Proximity Infrared Detector to wake the panel when panel is
approached.
Front Bezel Button: Provides both access to the Setup and Calibration pages and
toggles the panel between a “sleep” or “wake” state. This button
is also user-programmable.
Front Bezel ButtonBezelSpeakerTouch screenMicrophone
NXD-500IW Specifications (Cont.)
Front Panel Components (Cont.)
Microphone: Frequency response of 300 to 3400Hz; used for intercom
applications.
Speaker: Output of 4Ohm, 2 Watts, with a 300Hz low cutoff frequency.
Side Panel Connectors:
Ethernet 10/100
Port:
RJ-45 port for 10/100 Mbps communication. The Ethernet port
automatically negotiates the connection speed (10 Mbps or 100
Mbps), and whether to use half duplex or full duplex mode.
Power is supplied through Power Over Internet (PoE). NXD-
500IW panels communicate with the NetLinx Master using the
ICSP protocol over Ethernet. LEDs show communication activity,
connections, speeds, and mode information:
L/A-link/activity - Yellow LED lights On when the Ethernet cables
are connected and terminated correctly and then blinks when
receiving Ethernet data packets.
SPD-speed - Green LED lights On when the connection speed is
100 Mbps and turns Off when the speed is 10 Mbps.
Mini-USB
Connector:
5-pin Mini-USB connector used for programming, firmware
update, and touch panel file transfer between the PC and the
target panel. The connector is also used for providing audio
output for external speakers.
Operating /Storage
Environments:
Operating Temperature: 0° C (32° F) to 40° C (104° F)
Operating Humidity: 5% - 95% relative humidity
(non-condensing)
Storage Temperature: -20° C (-4° F) to 60° C (140° F)
Storage Humidity: 5% - 85% RH
Indoor Installation and Operation ONLY
Included
Accessories:
NXD-500IW Installation Guide (93-2261-09)
Other AMX
Equipment:
CB-TP5i Rough-In/Wallbox (FG038-11)
Back Cover for the CB-TP5i Rough-In/Wallbox (FG038-12)
PS-POE-AF PoE Injector (FG423-80)
CC-USB Type-A to Mini-B 5-wire programming cable
(FG10-5965)
USB to Headphone Adaptor (FG5966-23)
FIG. 2 Connector layout on the NXD-500IW
Ethernet 10/100 portMini-USB portBack box
AMX NXD-500iW-MW

Trebate pomoć?

Broj pitanja: 0

Imate li pitanja u vezi s proizvodom NXD-500iW-MW trgovačke marke AMX ili vam treba pomoć? Ovdje postavite svoje pitanje. Navedite jasan i sveobuhvatan opis problema i vašeg pitanja. Što više pojedinosti navedete za svoje pitanje i pitanje, lakše je drugim vlasnicima proizvoda NXD-500iW-MW trgovačke marke AMX pravilno odgovoriti na vaše pitanje.

Ovdje besplatno pogledajte priručnik za proizvod NXD-500iW-MW trgovačke marke AMX. Ovaj je priručnik pod kategorijom , a ocijenio ga je sljedeći broj osoba: 1 prosječnom ocjenom od 9.7. Ovaj je priručnik dostupan na sljedećim jezicima: Engleski. Imate li pitanja u vezi s proizvodom NXD-500iW-MW trgovačke marke AMX ili vam treba pomoć? Ovdje postavite svoje pitanje

Značajke proizvoda NXD-500iW-MW trgovačke marke AMX

Za izvrstan zvuk nije potrebno kupiti vanjske zvučnike. S integriranim zvučnicima ovaj je zaslon spreman za upotrebu nak...
Općenito
Brend AMX
Model NXD-500iW-MW
Proizvod Monitor
Jezik Engleski
Vrsta datoteke PDF
Zaslon
Dijagonala monitora 5 "
Vrijeme odziva - ms
Svjetlina zaslona 200 cd/m²
Odnos kontrasta (tipičan) 250:1
Razlučivost zaslona 800 x 480 pikseli
Veličina točke 0.14 x 0.14 mm
Omjer stranica 16:9
Vidljiva površina zaslona (VxŠ) 109.2 x 65.2 mm
Učinak
Tip dodirnog zaslona -
OmniTapps Multitouch kompatibilnost -
Ugrađeni zvučnici Da
Broj zvučnika 2
Priključci i sučelja
Broj USB 2.0 priključaka 1
Broj Ethernet LAN (RJ-45) priključaka 1
Napajanje
Potrošnja energije (tipično) 5.5 W
Ostale značajke
Dimenzije (ŠxDxV) 142 x 50 x 105 mm
Težina i dimenzije
Težina (bez postolja) 360 g
Radni uvjeti
Dozvoljeni raspon temperatura za skladištenje (T-T) -20 - 60 °C
Raspon radne temperature (T-T) 0 - 40 °C
Opseg relativne vlažnosti pri radu (H-H) 5 - 95 %
Raspon relazivne vlažnosti pri skladištenju 5 - 85 %
Ergonomija
Mogućnost zidne montaže Da
Dizajn
Boja proizvoda Bijelo
Certifikati
Certifikacija FCC 15 B, CE, IEC 60950, RoHS
prikaži više

Često postavljana pitanja

Ispod se navode najčešće postavljana pitanja u vezi s AMX NXD-500iW-MW.

Vaše pitanje nije navedeno? Ovdje postavite svoje pitanje